Yamaha rtx810 User Manual page 4

Safety precautions
(Continued from the previous page)
8. Ensure to only use the specified power supply
voltage. Use of any different power supply voltage,
for example overseas voltage, could result in
damage to the product.
9. Connect the power plug to an outlet that you can
see and reach in thereby ensuring that you can
easily remove it if the necessity arises.
10. Ensure to fully and securely insert the power plug
into the outlet. Being insufficiently inserted could
result in an electric shock. It could also lead to dust
accumulating on the plug, which could then result
in heat or fire.
11. Verify that the current capacity of the outlet or
a power strip in thereby ensuring that use of the
product does not exceed it. Any overheating or
degradation of the power strip could result in fire.
12. Ensure to only use cables that suit the specifications
of the port concerned. Connecting any cable other
than which fits the originally intended specifications
could result in fire or damage to the product.
13. Ensure not to touch any of the ports with your
fingers or anything metallic. Failure to observe
this could result in electric shock or damage to the
product.
14. Ensure the product does not fall or strongly
impacted. The internal parts could break, which
could then result in electric shock, fire, or damage
to the product.
15. Do not install the product anywhere it will be
exposed to dust or humidity, oily smoke or steam,
or corrosive gas. Failure to observe this could result
in fire, electric shock, or damage to the product.
16. Ensure adequate heat ventilation. Failure to observe
this could result in fire or damage to the product.
• Ensure not to cover the product with a cloth or
tablecloth.
• Ensure the product does not get pushed into a
narrow, poorly ventilated place.
• Ensure the ventilation holes do not get blocked.
17. Ensure not to touch the product or the power cable
if you hear any thunder. Failure to observe this
could result in electric shock.
4
18. Periodically remove any dirt and dust from the
power cable. Failure to observe this could result in
fire.
19. Ensure not to install the product anywhere unstable
or where it will be exposed to vibrations as it could
fall over or turn upside down, thus resulting in
injury or damage to the product.
20. Ensure not to install the product anywhere it will be
exposed to direct sunlight or extraordinarily high
temperatures (near a heater, etc.). Failure to observe
this could result in damage to the product.
21. Ensure not to use the product anywhere it will
be exposed to rapid changes in the ambient
temperature. Any rapid change in the ambient
temperature could result in condensation on the
product, which could then result in damage to the
product. Ensure to leave the product for a while
until it has dried off with the power turned off if any
condensation has occurred.
22. Ensure not to stack the product with other
equipment. Failure to observe this could result in
heat building up and damage to the product.
23. Ensure not to connect any cables while the power
is turned on. Failure to observe this could result
in damage to the product and any connected
equipment.
24. Ensure to earth any static electricity from your body
or clothing before touching the product. Failure to
observe this could result in damage to the product.
25. Connecting a USB data communication terminal
to the USB port of the product will enable a
wireless WAN connection via the 3G mobile phone
network. Even if the data communication terminal
contract is a flat-rate system any use of it with an
improper configuration could be charged for under
the measured-rate system. Please note that Yamaha
cannot assume any responsibility for any losses
resulting from improper use or configuration of the
product.
26. Please note that the USB port and microSD slot of
this product will not necessarily support all types of
USB memory sticks and microSD cards.