Windows Diagnostic Test Messages - Dell QMD8262-k User Manual

3–Adapter Management Applications
Windows Management Applications

Windows Diagnostic Test Messages

If a test fails, an appropriate error code is generated and displayed, as shown in
Table 3-9. Note that this table does not list error messages for the Interrupt and
Link tests.
Table 3-9. Windows Diagnostic Test Messages
Test Error Message
Loopback LB_TEST_OK
Loopback LB_SEND_WAIT_QUEUE_ERR
Loopback LB_NORCV_ERR
Loopback LB_NOMEM_ERR
Loopback LB_TX_QUEUE_ERR
Loopback LB_SHORT_DATA_ERR
Loopback LB_SEQUENCE_ERR
Loopback LB_DATA_ERR
Loopback LB_ERR_CNT
Register CR_TEST_OK
Register CR_NIU_MODE
Register CR_PHY
Register CR_ERRCNT
Hardware HW_TEST_OK
Hardware HW_DMA_BZ_0
Hardware HW_DMA_BZ_1
Hardware HW_DMA_BZ_2
Hardware HW_DMA_BZ_3
Hardware HW_SRE_PBI_HALT
Hardware HW_SRE_L1IPQ
Hardware HW_SRE_L2IPQ
Hardware HW_SRE_FREEBUF
Hardware HW_IPQ
Description
Loopback test has passed
Send queue blocked
Receive packet not received
No memory error
Transmit queue error
Looped data short error
Looped data out of sequence
Looped data corrupted
Looped error count
Control register test passed
Network interface unit (NIU) error
Physical layer (PHY) error
Control register error count
Hardware test has passed
DMA channel 0 is busy
DMA channel 1 is busy
DMA channel 2 is busy
DMA channel 3 is busy
Segmentation and reassembly engine currently halted
Segmentation and reassembly engine currently paused
due to L1 IPQ discard failure
Segmentation and reassembly engine currently paused
due to L2 IPQ discard failure
Segmentation and reassembly engine free buffer list is cur-
rently empty.
IPQ is currently not empty
103 CU0354602-00 L