Overheat-Alert Indicator; Digital Speedometer; Speedometer; Fuel Gauge - Yamaha 40V Owner's Manual

Hide thumbs Also See for 40V:
Table of Contents

Advertisement

1. Oil level indicator
EMU26583

Overheat-alert indicator

If the engine temperature rises too high, the
alert indicator will start to blink. For further in-
formation on reading the indicator, see page
33.
ECM00052
NOTICE
Do not continue to run the engine if the
overheat-alert indicator is on. Serious en-
gine damage will occur.
1
1. Overheat-alert indicator
EMU26602

Digital speedometer

This gauge shows the boat speed and other
information.
Instruments and indicators
1
ZMU01867

1. Speedometer

2. Fuel gauge

3. Trip meter/clock/voltmeter
4. Alert indicator(s)
All segments of the display will light momen-
tarily after the main switch is turned on and
will return to normal thereafter.
EMU36061
Speedometer
The speedometer displays km/h, mph, or
knots, according to operator preference. Se-
lect the desired units of measurement by set-
ting the selector switch on the back of the
gauge. See the illustration for settings.
ZMU01868
1. Cap
2. Selector switch (for speed unit)
3. Selector switch (for fuel sensor)
EMU26713
Fuel gauge
Eight segments indicate the fuel level. When
29

Advertisement

Table of Contents
loading

This manual is also suitable for:

50h

Table of Contents