Call - Nokia 5300 User Manual

S e t t i n g s
To activate the phone for data transfer or image printing, connect the data cable.
Confirm USB data cable connected. Select
options:
Nokia mode — to use the cable for PC Suite
Music sync — to use the phone with a PictBridge compatible printer or with your
compatible PC
Data storage — to connect to a PC that does not have Nokia software and use the
phone as a data storage device
To change the USB mode, select
cable > Nokia mode, Printing, or

■ Call

Select Menu > Settings > Call and from the following options:
Call forwarding — to forward your incoming calls (network service dependency).
You may not be able to forward your calls if some call restriction functions are
active. See Call restrictions in "Security," p. 49.
Voice clarity > Active — to enhance speech intelligibility especially in noisy
environments
Anykey answer > On — to answer an incoming call by briefly pressing any key,
except the power key, the camera key, the left and right selection keys, or the end
key
Automatic redial > On — to make a maximum of 10 attempts to connect the call
after an unsuccessful call attempt
1-touch dialing > On — to dial the names and phone numbers assigned to the
1-touch-dialing keys, 2 to 9, by pressing and holding the corresponding number
key
Call waiting > Activate — to have the network notify you of an incoming call
while you have a call in progress (network service dependency). See "Call
waiting," p. 23.
Summary after call > On — to briefly display the approximate duration and cost
(network service dependency) of the call after each call
Send my caller ID > Yes — to show your phone number to the person you are
calling (network service dependency). To use the setting agreed upon with your
service provider, select Set by network.
46
mode., and select from the following
Menu > Settings > Connectivity
Data storage.
> USB data