Vtr Overall Section; Cabinet (R) Block Assembly; Flash Unit (Mc), Flash Unit (St) - Sony DCR-PC110 Service Manual

2-4. VTR OVERALL SECTION, CABINET (R) BLOCK ASSEMBLY
Screw
1
(M1.7 × 2.5),
lock ace, p2
Two screws
2
(M1.7 × 2.5),
lock ace, p2

2-5. FLASH UNIT (MC), FLASH UNIT (ST)

Note: The power capacitor (C2010) of the flash unit is charged to the high tension voltage as high as 300 V at a maximum.
You will get electrical shock when you touch the terminal of the charged capacitor. The charged potential remains
even after the main power of the machine is turned off.
Discharge the remaining power in the capacitor referring to Service Note (page 8).
3 Control switch block
(ME30550) (7P)
(Note)
Capacitor terminal
4 (Note)
Three screws
2
(M1.7 × 2.5),
lock ace, p2
6 Flash unit (ST) (33P)
7 Flash unit (MC)
8
5 FP-255 flexible board
(27P)
Screw
1
(M1.7 × 2.5),
lock ace, p2
qa ST cabinet (upper)
qg Remove the
5 FP-255 flexible board
(27P)

7 Cabinet (R) block assembly

FJ-027 board (70P)
4

VTR overall section

6
0 Four claws
two solderings
Stroboscope
qj
assembly
2-5
Screw
3
(M1.7 × 2.5),
lock ace, p2
qh Flash unit (ST)
qf ST cabinet (lower)
Screw
qd
(M1.7 × 2.5),
lock ace, p2
9 Precision screw
Screw (dia, 1.7 × 4)
qs
(M1.7 × 2.5),
lock ace, p2