Dhcp Server Settings - D-Link DIR-400 User Manual

Section 3 - Configuration
DHCP stands for Dynamic Host Control Protocol. The
DIR-400 has a built-in DHCP server. The DHCP Server
will automatically assign an IP address to the computers
on the LAN/private network. Be sure to set your computers
to be DHCP clients by setting their TCP/IP settings to
"Obtain an IP Address Automatically." When you turn your
computers on, they will automatically load the proper TCP/
IP settings provided by the DIR-400. The DHCP Server will
automatically allocate an unused IP address from the IP
address pool to the requesting computer. You must specify
the starting and ending address of the IP address pool.
Enable DHCP Check the box to enable the DHCP server function
Server: on your router. Uncheck to disable this function.
DHCP IP Enter the starting and ending IP addresses for the
Address Range: DHCP server's IP assignment.
DHCP Lease The length of time for the IP address lease. Enter
Time: the lease time in minutes.
D-Link DIR-400 User Manual

DHCP Server Settings

4