Yamaha DM 2000 Owner's Manual page 303

M. BAND DYNA.
Two input, two output 3-band dynamics processor, with individual solo and gain reduction
metering for each band.
Parameter Range
LOW GAIN
–96.0 to +12.0 dB
MID GAIN
–96.0 to +12.0 dB
HI. GAIN
–96.0 to +12.0 dB
PRESENCE
–10 to +10
EXP. THRE
–54.0 dB to –24.0 dB
1:1 to ∞:1
EXP. RAT
EXP. REL 1
EXP. BYP
ON/OFF
CMP. THRE
–24.0 dB to 0.0 dB
CMP. RAT
1:1 to 20:1
CMP. REL
1
CMP. ATK
0–120 ms
CMP. KNEE
0–5
CMP. BYP
ON/OFF
LIM. THRE
–12.0 dB to 0.0 dB
LIM. REL
1
LIM. ATK
0–120 ms
LIM. KNEE
0–5
LIM. BYP
ON/OFF
LOOKUP
0.0–100.0 ms
L–M XOVR
21.2 Hz–8.00 kHz
M–H XOVR
21.2 Hz–8.00 kHz
SLOPE
–6 dB to –12 dB
CEILING
–6.0 dB to 0.0 dB, OFF
1. 6.0 ms–46.0 s (fs=44.1 kHz), 5.0 ms–42.3 s (fs=48 kHz), 3 ms–23.0 s (fs=88.2 kHz), 3 ms–21.1 s
(fs=96 kHz)
Effects Parameters
Description
Low band level
Mid band level
High band level
For positive values, the threshold of the high band is low-
ered and the threshold of the low band is increased. For
negative values, the opposite will occur. When set to 0, all
three bands are affected the same.
Expander threshold
Expander ratio
Expander release time
Expander bypass
Compressor threshold
Compressor ratio
Compressor release time
Compressor attack
Compressor knee
Compressor bypass
Limiter threshold
Limiter release time
Limiter attack
Limiter knee
Limiter bypass
Lookup delay
Low/mid crossover frequency
Mid/high crossover frequency
Filter slope
Specifies the maximum output level
289
DM2000—Owner's Manual