Breville hotcup vkj476 User Manual page 6

USING YOUR HOTCUP
Before using your HotCup
• Remove your HotCup
material and position your HotCup
edge.
• Follow the instructions below and discard the first full tank of water. Repeat once more.
This will remove any residues that may remain from the manufacturing process.
Using your HotCup
Always position your HotCup
accidentally operated, especially by children. As you use your HotCup
portion of the water boiled will be transferred back to the water reservoir. This will
mean the water reservoir may become hot. Always use care when handling your
HotCup .
™
1. Press the lid flap release button to open the lid.
2. Fill the water chamber from your cold tap up to the MAX mark.
3. Close the lid and press the stop button. This will make sure that your HotCup
immediately start a boil cycle when you place it onto the power base.
4. Connect your HotCup
5. Place a suitable cup or container with a tea bag, coffee, sugar, etc. below the
dispensing nozzle. Never operate your HotCup
placed below the dispensing nozzle. Adjust the dispensing control to the required
setting. The control adjusts the quantity of boiling water dispensed by your HotCup
For smaller cups like teacups, set the control towards the
coffee mugs, set the control towards the
use, it's best to use a lower setting until you gain experience using your HotCup
6. Press the start button. The body will light up blue and your HotCup
7. The selected quantity of boiling water will be dispensed into the cup. Your HotCup
now ready to use again. If, after just having boiled, the start button doesn't operate,
simply wait a few seconds before trying it again.
Stopping your HotCup
If you have started the boil procedure and then decide you want to stop your HotCup
any reason, simply press the stop button. You can also stop water that is being dispensed
by pressing the stop button. The boiled water will be safely transferred back into the water
reservoir.
6
™
for the first time
™
carefully from the box. Remove any packaging and promotional
™
on a dry, level, secure work surface away from the
™
™
in such a way that the start button cannot be
™
to a mains supply socket.
™
™
without a cup or suitable container
™
setting; for larger cups like
setting. If you are not sure which setting to
, a certain
™
will not
™
.
™
.
™
will start to boil.
™
is
™
for
™