Table of Contents
Advertisement
4-4 Enforce E-E Operation
4-5 Enforce E-E Output
4-4-1 Temporarily Outputting the Recording Port Input Signal to the
Playback Port
4-6 (E)
Chapter 4 Recording
The signal input at the recording port can be temporarily output to the
playback port using the PORT SELECT button. This is called Enforce E-E
Operation.
Notes
• Enforce E-E Operation can be used only when the MAV-777 is in the Panel
mode.
• The table below shows the port combinations when Enforce E-E Operation
can be used.
Record Mode
R1
R2
R3
O
Possible
×
Not possible
1
Set CP Setup mode item 0013: Enforced EE Operation to Enable.
2
Hold down the PORT SELECT button to select the playback port to which
you want to output the input signal, and then press the PORT SELECT
button for the recording port.
The input signal is output to the playback port as long as these buttons
remain depressed.
Playback Mode
P1
P2
P3
O
O
O
×
O
O
×
×
O
Advertisement
Table of Contents
