Waveforms - Pioneer DJM-700-K Service Manual

5

10.27 WAVEFORMS

Waveform Measurement Conditions
Measure
IN or OUT IN CH
CH
IN CD CH1
IN LINE CH1
IN PHONO CH3
IN MIC 1/2 MIC 1/2
IN RETURN RETURN
OUT MASTER1/2 CH1/CD
OUT BOOTH CH1/CD
OUT REC CH1/CD
OUT SEND CH1/CD
OUT HP CH1/CD
OUT DIG OUT CH1/CD
Switch type settings (fixed)
MASTER ATT • • • •
fs • • • • • • • • •
MONO/ST
• • • • • •
CH FADER CURVE
CROSS FADER CURVE
CROSS FADER ASSIGN
Notes:
• On grounding during diagnosis of the MAIN Assy
When the flexible cables or other cables that connect between the MAIN Assy and INPUT or OUTPUT Assys are
removed, ground for some audio analog signals may be shifted upward from the chassis. In such a case, connect the
frame of the phono plug (GND) and the chassis (GND) then perform diagnosis.
• On grounding during diagnosis of the INPUT or OUTPUT Assy
When the INPUT or OUTPUT Assy is removed, ground for some audio analog signals may be shifted upward from the
chassis. In such a case, connect the frame of the phono plug (GND) and the chassis (GND) then perform diagnosis.
5
6
IN LEVEL
IN FREQUENCY
(Trim Max)
-6dB 1K
-6dB 1K
-46dB 1K
-46dB 1K
-6dB 1K
-6dB 1K
-6dB 1K
-6dB 1K
-6dB 1K
-6dB 1K
-6dB 1K
* The output waveform is measured at the CH1CD input.
0dB
96K
ST
FLAT
• • •
CENTER
• • •
THRU
• • •
6
7
RL Other settings
Center the Level/Depth VR
Ω
10K
Ω
10K
Ω
10K
Ω
10K
Ω
32 Center HP LEVEL
Ω
75
DJM-700-S
7
8
Other settings
Center all EQs/FADER at Max
Center all EQs/FADER at Max
Center all EQs/FADER at Max
Center all EQs/FADER at Max
Center all EQs/FADER at Max
Center all EQs/FADER at Max
105
8
A
B
C
D
E
F