The Qos Monitor Screen - ZyXEL Communications vmg8924-b10a User Manual

Table 52 Policer Setup: Add/Edit
LABEL
Available Class
Selected Class
Apply
Cancel

9.7 The QoS Monitor Screen

This screen is available only when you set a rate limit for a WAN queue in the Queue Setup screen
and the WAN interface is connected. Use this screen to monitor the traffic statistics for both the
WAN and LAN interfaces. To view the Device's QoS packet statistics, click Network Setting > QoS
> Monitor. The screen appears as shown.
Figure 80 Network Setting > QoS > Monitor
The following table describes the labels in this screen.
Table 53 Network Setting > QoS > Monitor
LABEL
Refresh Interval
Interface Monitor
#
Name
Pass Rate
Drop Rate
Queue Monitor
#
VMG8924-B10A User's Guide
DESCRIPTION
Select a QoS classifier to apply this QoS policer to traffic that matches the QoS classifier.
Highlight a QoS classifier in the Available Class box and use the > button to move it to the
Selected Class box.
To remove a QoS classifier from the Selected Class box, select it and use the < button.
Click Apply to save your changes.
Click Cancel to exit this screen without saving.
DESCRIPTION
Enter how often you want the Device to update this screen. Select No Refresh
to stop refreshing statistics.
This is the index number of the entry.
This shows the name of the interface on the Device.
This shows how many packets forwarded to this interface are transmitted
successfully.
This shows how many packets forwarded to this interface are dropped.
This is the index number of the entry.
Chapter 9 Quality of Service (QoS)
149