Receiver Operations; Selecting A Component - Sony STR-DA80ES Operating Instructions Manual

Receiver Operations

Selecting a Component

To listen to or watch a connected component, first
select the function on the receiver or with the remote.
Before you begin, make sure you have:
• Connected all components securely and correctly as
indicated on pages 4 to 12.
• Turned MASTER VOL to the leftmost position (0) to
avoid damaging your speakers.
• Pressed PANEL UP/DOWN to access the buttons
inside of the front cover.
PANEL UP/DOWN
Digital processing
POWER control buttons
POWER
DISPLAY
VIDEO 1 VIDEO 2 VIDEO 3 LD/DVD TV/DBS TAPE
S-VIDEO VIDEO L AUDIO R VIDEO 3 {MEMORY} FM MODE TUNING EQUALIZER
INPUT – +
BAND
SPEAKERS
A
OFF B
PRESET TUNING
A + B – +
SHIFT FM/AM
PHONES
PHONES BASS BOOST
SPEAKERS
DIRECT PASS
1
Press POWER to turn on the receiver.
2
Select the component you want to use:
To watch or
listen to
Video tapes
Video camera recorder or
video game
Laser discs or DVD discs
TV programs
Audio tapes
Digital Audio Tapes
(DAT) or MiniDiscs (MD)
Compact Discs (CD)
Radio programs
Records
*
DBS tuners can be used with the USA, Canadian, and
Australian models.
3
Turn on the component, for example, a CD player,
and then start playing.
To tune in radio stations on this receiver, see
"Receiving Broadcasts" on page 15.
MASTER VOL
SET UP BALANCE
MUTING
MASTER VOL
SUR
PANEL
EQ
UP/DOWN
INDEX
DAT/MD CD TUNER PHONO
DPC SET UP BALANCE
•
MODE
CH
B b
0 10
L R
MODE FUNCTION
SOUND FIELD GENRE MODE
DIRECT BASS INPUT
PASS BOOST MODE
MODE FUNCTION
INPUT MODE
Rotate FUNCTION to light
up
VIDEO 1 or VIDEO 2
VIDEO 3
LD/DVD
*
TV/DBS
TAPE
DAT/MD
CD
TUNER
PHONO
Receiver Operations
4
Turn MASTER VOL to adjust the volume.
To adjust the volume of the TV's speakers, use the
volume control on the TV.
z
To enjoy any video source and any audio source at
the same time
Do the procedure below to select and play any video
source in combination with any audio source.
1 Select a program source.
2 Select one of the available program source.
To select
VCR, LD/DVD
player, or TV
Tape deck, DAT/MD
deck, CD player, tuner,
or turntable
Note
If 8 seconds elapse after you press the MODE button,
"NORMAL" will appear in the display. If this happens,
repeat Step 2.
z
To listen to digital program sources
Do the procedure below.
1 Do Steps 1 and 2 above to select the component.
2 Press INPUT MODE repeatedly to select input mode
for the component.
When you select The receiver selects
AUTO INPUT the component connected to the
following jack(s) depending on
the component selected in Step 1
above (listed in order of priority).
When you selected LD/DVD:
1 LD DVD AC-3 RF IN jack
2 LD DVD COAXIAL IN jack
3 LD DVD OPTICAL IN jack
4 LD/DVD (analog) jacks
When you selected TV/DBS, CD,
or DAT/MD:
1 the OPTICAL jack
2 the analog jacks
DIGITAL(AC-3 RF) the component connected to the
(appears only when LD DVD AC-3 RF IN jack
you selected LD/
DVD in Step 1)
DIGITAL the component connected to the
(COAXIAL) LD DVD COAXIAL IN jack
DIGITAL the component connected to the
(OPTICAL) OPTICAL jack
ANALOG INPUT the component connected to the
analog jacks
Getting Started
Press DISPLAY repeatedly to
display
VISUAL SELECT
AUDIO SELECT
(Continued)
13