Choosing An Installation Location; Projector Installation Location; Touch Unit Installation Location - Epson eb-595wi Installation Manual

Using the Product Safely

Choosing an Installation Location

Projector installation location

• Carry out power supply wiring work for the installation location of the setting plate in advance.
• Install the projector away from other electric devices such as fluorescent lights or air conditioners. Some kinds of
fluorescent lights could interfere with the remote control of the projector.
• It is recommended to keep connection cable length less than 20 meters to reduce external noise.
• We recommend using stick-on screens or board screens.
• Make sure the projector is installed under the following conditions.
• The projected image is a rectangular shape without any distortion.
• The projector is tilted at an angle of no more than ±3° vertically and horizontally in relation to the screen.
• When using the interactive function (Easy Interactive Function), install so that the projected image is within reach.
• Do not install the projector or the screen in a location subject to direct sunlight. If the projector or the screen are
subject to direct sunlight, the interactive function may not operate correctly.

Touch Unit installation location

• When using the Touch Unit, install the projector using one of the following methods. The Touch Unit cannot be used
if another installation method is used.
• Mount the projector on a wall or suspend it from a ceiling and project images from in front of the screen.
• Install vertically on a table and project from the front of the desk. (When installing vertically on a table, you need
the optional Interactive Table Mount (ELPMB29).)
• Before installing the Touch Unit, make sure that the installation location meets the following conditions.
• The Touch Unit can be secured with magnets or with screws.
• A flat, smooth, unwarped surface with no unevenness on the screen surface of more than 5 mm.
• When installing on a whiteboard, install the Touch Unit within the frame of the whiteboard.
5