Loading Paper On The Bypass Tray - Toshiba E-studio 2506 User Manual

1.PREPARATION
6
7
Register the paper size into the equipment.
When you load paper in the drawer for the first time, register the paper size. Be sure to register it correctly, otherwise it
could cause a paper misfeed.
For the registration, see the following pages:
 P.28 "Preparation 3 - Registering Paper Size and Type"
Be sure to register the paper size each time you have changed it.
 Loading paper on the bypass tray
The contents of the original(s) are rotated when copied on paper of the following sizes fed from the bypass tray.
A/B format: A3, A4-R, A5-R, B4, B5-R, FOLIO
LT format: LD, LG, LT-R, ST-R, COMP, 13"LG, 8.5"SQ
K format: 8K, 16K-R
For example, to copy an A5-size original, place the original on the original glass in A5 portrait orientation and paper on
the bypass tray in A5 landscape orientation (A5-R).
To enlarge an A4-size original to A3, place the original on the original glass in A4 portrait orientation and A3 paper on
the bypass tray.
The illustrations below are example of loading A4/LT size paper.
For the acceptable paper, see the following pages:
 P.19 "Acceptable paper types"
1
Downloaded from www.Manualslib.com
While holding the green lever of the front side guide, adjust the side guides to the
paper size.
Push the drawer straight into the equipment slowly until it stops.
Do not catch your fingers in the drawer when closing it.
This could cause injury.
Open the bypass tray.
manuals search engine
1 PREPARATION
Preparation 2 - Loading Paper 23