Figure 3-15 After Adding A Device To The Mesh - Motorola MOTORMESH 4300 User Manual

21
Observe the Progress Log for any errors.
Notice that the new device is now shown in the IAP group in the Device Tree in MeshManager.
Figure 3-15
22
To verify the new device configuration, select the Probe button again to re-probe the device.
IMPORTANT NOTE: If there are any errors at the time that a device is added, performing a re-probe will
confirm a successful configuration.
July 2007
After Adding a Device to the Mesh
MOTOMESH DUO 2.0 4300 Users Guide
3-11