Sharp AR-FX12 Service Manual page 32

66-19
Purpose Setup
Function (Content) Used to backup the Address data
(Set values of rapid key dialing) into the flash
Memory (AR-MM9).
(When FAX is installed and FAX extended
memory is installed.)
Section FAX
Item Operation
Operation/Procedure Address data is backed up into Flash ROM.
Contents of backup data
•One-touch
•FTP expansion
•Group expansion
•Program
•User index
•Standard sender
•I-FAX sender registration
•Polling allow number
•Memory box
•Sender's name
•FAX sender
•Subject
•File name
•FAX receive select table
•iFAX receive YES/NO
The data other than the above are not backed
up.
SIMULATION 66-19
ADDRESS DATA BACK UP. (WRITE TO FLASH ROM)
ARE YOU SURE?
1. YES
2. NO
Press [START] key.
SIMULATION 66-19
ADDRESS DATA BACK UP. (WRITE TO FLASH ROM) EXECUTING...
After completion of backup
<Set values>
1 Backup executed
2 No backup
66-20
Purpose Setup
Function (Content) Used to restore the backup data (SIM 66-19) to
Address data. (When FAX is installed and FAX
extended memory is installed.)
Section FAX
Item Operation
Operation/Procedure Address data backed up with SIM 66-19 are read
from the option Flash ROM and written into the
machine.
However, data backed up in the Tiger series
cannot be restored to the machine. If an option
Flash ROM backed up in the Tiger series is
installed, the data in the option Flash ROM are
deleted.
1
1
AR-FX12 SIMULATIONS, FAX SOFTWARE SWITCH 6-20
SIMULATION 66-20
ADDRESS DATA (READ FROM FLASH ROM)
ARE YOU SURE ?
1. YES
2. NO
Press [START] key.
SIMULATION 66-20
ADDRESS DATA BACK UP. (READ FROM FLASH ROM) EXECUTING...
After completion of reading
<Set value>
1 Read/Write executed
2 Read/Write not executed
66-21
Purpose Adjustment, setup, operation data output, check
(display, print)
Function (Content) Used to print the FAX information (registrations,
communication management, file management,
system errors). (Only when FAX is installed.)
Section FAX
Item Data
Operation/Procedure Information related to FAX is printed.
1) Enter the number corresponding to the
information(item) to be printed with 10-key.
2) Press [start] key.
SIMULATION 66-21
FAX INFORMATION PRINT OUT. SELECT 1-5, AND PRESS START.
1.REGISTERED 2.MANAGEMENT
3.FILE MANAGEMENT 4.SYSTEM ERROR
5.PROTOCOL
Select other than 0 and
press [START] key.
If there is no print data,
the display returns to the
(When 1)
original state without printing.
SIMULATION 66-21
FAX INFORMATION PRINT OUT.EXECUTING...
1. REGISTERED
After completion of printing
<List of set values>
1 REGISTERED Various registered information
2 MANAGEMENT Communication management information
3 FILE File management information
MANAGEMENT
4 SYSTEM ERROR System error information
5 PROTOCOL Protocol information
1
1
0