Poor Wash Results - Baumatic BWMI1216 Instruction Manual

Poor wash results

My garments are looking grey and there are limescale
deposits present in the drum of my washing machine.
o There is not enough detergent being added.
o The incorrect detergent is being used.
o Stains are not being pre-treated.
o The correct wash programme or wash temperature was not
selected.
I have followed the advice given above, but my
garments are still coming out with grey stains on them.
o The garments are soiled with oils, ointments or grease and were
washed without enough detergent.
o The wash temperature selected was too low.
o Fabric conditioner has come into contact with the garments. If this
happens try to wash out these stains as quickly as you can and try
to avoid getting conditioner on the garments in future.
After the final rinse, I can still see foam.
o Modern detergents can result in there still being foam in the final
rinse, this does not mean that the washing is not being rinsed
properly.
There is white residue on my garments when I remove
them from the appliance.
o Modern detergents can contain insoluble contents, and white
residue after a wash cycle is not necessarily a sign of the garments
not being rinsed properly.
o You should shake out the garment or brush it off. In future possibly
turn the garment inside out before it is washed. You may wish to
move from a powder detergent and switch to a liquid detergent
instead.
28