Download Print this page
Honda Remote engine starter transmitter Installation Instructions
Honda Remote engine starter transmitter Installation Instructions

Honda Remote engine starter transmitter Installation Instructions

Honda 2016 odyssey

Advertisement

Quick Links

INSTALLATION
INSTRUCTIONS
PARTS LIST
Transmitter
ID label
Transmitter Registration
• Perform remote control transmitter registration first in
accordance with the following steps.
• An additional with remote control transmitter can be
registered (total two units).
1.
Acquire the PCM Code from the Interactive Network.
DATA LINK CONNECTOR
(The position may be different.)
HDS/MVCI
2.
Connect the HDS/MVCI to the data link connector,
then turn the ignition switch on.
© 2015 American Honda Motor Co., Inc. – All Rights Reserved.
Accessory
REMOTE ENGINE
STARTER TRANSMITTER
3.
4.
B32201AH
AII02125-21 (1507)
Application
2016 ODYSSEY
Start the Honda Diagnostic System, then click the
car icon.
Input the VIN and other requirements in accordance
with the HDS, then click the check button.
Input the VIN and other
required information.
Publications No.
VERSION 1
Issue Date
JULY 2015
CAR ICON
B40150AH
CHECK BUTTON
B32102BH
1 of 4
08E91-E54-1000-90

Advertisement

loading

Summary of Contents for Honda Remote engine starter transmitter

  • Page 1: Installation Instructions

    Input the VIN and other CHECK BUTTON required information. HDS/MVCI B32102BH B32201AH Connect the HDS/MVCI to the data link connector, then turn the ignition switch on. 1 of 4 © 2015 American Honda Motor Co., Inc. – All Rights Reserved. AII02125-21 (1507) 08E91-E54-1000-90...
  • Page 2 (USA)” Click the check button. Select “R/C ENG STARTER.” “Obtain PCM-code” message. CHECK BUTTON B32104AH CHECK BUTTON Prepare the new transmitter to register. B32106AH 2 of 4 AII02125-21 (1507) © 2015 American Honda Motor Co., Inc. – All Rights Reserved.
  • Page 3 “DRIVER 1” or “DRIVER 2” the transmitter of Remote Control Engine Starter is used. Select the “DRIVER 1” or “DRIVER 2”. CHECK BUTTON B32204CH Select the driver ID. B62990AH 3 of 4 © 2015 American Honda Motor Co., Inc. – All Rights Reserved. AII02125-21 (1507)
  • Page 4 18. Attach the ID label (Driver 1, Driver 2, or Black) to the transmitter as shown. 19. Make sure that the engine starter operates properly with the transmitter and additional transmitter. 4 of 4 AII02125-21 (1507) © 2015 American Honda Motor Co., Inc. – All Rights Reserved.