Pioneer MJ-D707 Service Manual page 45

QQ
3 7 63 1515 0
Step No. Operation Keys and Operation Method
7 Press the STOP key.
8 Press the REC MODE key (until AUT YOBI is displayed).
9 Preliminary adjustment starts when the PLAY key is
pressed.
10 Press the STOP key.
11 Press the EDIT/NO key.
Note: When this adjustment is performed after defocus adjustment has been performed, defocus is returned to the initial status, and defocus
adjustment must be performed.
5
Normal adjustment
Step No. Operation Keys and Operation Method
1 Power ON while holding the ENTER key and the PLAY
key depressed.
TE 2 Insert the test disc GGF1328 (MMD-212).
L 13942296513
3 Press the REC MODE key (until AUTO AJST is displayed).
4 Normal adjustment starts when the PLAY key is pressed.
5 Press the STOP key.
6
Defocus adjustment
Step No. Operation Keys and Operation Method
1 Power ON while holding the ENTER key and the
PLAY key depressed.
2 Insert the test disc GGF1328 (MMD-212).
3 Press the REC MODE key
(until deFO AJST is displayed).
4 Press the PLAY key.
Deforcus Value
www
5 Check the jitter value and end the adjustment when
the intermediate jitter value is 29 nsec or less.
6 Press the NAME CLIP key.
.
http://www.xiaoyu163.com
of c
C1 Error Value
x ao u163
y
i
http://www.xiaoyu163.com
2 9
8
FL Display
RST YOBI Return to menu display
AUT YOBI Preliminary adjustment mode
HAo :
LAg :
PTG :
|
Can't ADJ. Defective adjustment
(problem with the servo system)
COMPLETE Adjustment end
AUT YOBI Return to menu display
EEPROM W Writing to the EEPROM
Toc Reading
GGF1328
(MMD-212)
FL Display
EJECT Test mode
Q Q
LOADING
3 6 7 1 3 1 5
GRT AJST
AUTO AJST Normal adjustment mode
PEG :
HAG:
|
Can't ADJ. Defective adjustment
(problem with the servo system)
COMPLETE Adjustment end
AUTO AJST Return to menu display
FL Display
EJECT Test mode
LOADING
GRT AJST
deFO AJST
PEG : Defocus mode is entered, and after automatic
FESpp : execution of normal adjustment, the C1 error at
of000c0015 the time of focus offset 0 is displayed.
co
of+04 c0032 The C1 error with application of a focus offset of
.
about 0.4 µm on the + side is displayed.
The jitter value (J+) at this time is recorded.
MJ-D707, MJ-17D
9 4 2 8
4 Preliminary Adjustment
Status
Status
0 5 8 2 9 9 4 2 8
Status
m
9 9
Remarks
Remarks
9 9
Remarks
45