Polaris 2013 RANGER RZR S Service Manual page 256

CLUTCHING
4. With the snap ring (A) removed and spring pressure
relieved, remove the outer spring retainer (B),
compression spring (C), spacer (D), and inner spring
retainer (E).
E
C
C
D
5. Separate the two clutch sheaves.
6.22
D
B
A
B
E
9924125 - 2013 RANGER RZR / RZR S / RZR 4 Service Manual
© Copyright 2012 Polaris Sales Inc.
6. Inspect the helix on the moveable sheave.
Inspect for Abnormal Wear
7. Inspect the inner spring retainer for wear and replace
as needed.
Inspect for Abnormal Wear
8. Check the rollers in the stationary sheave for wear. If
rollers are worn, a new driven clutch assembly may
be needed.
Check Rollers for Wear