Shifting - Yamaha 115C Owner's Manual

Hide thumbs Also See for 115C:
Table of Contents

Advertisement

with the clip removed from the engine
shut-off switch.
EMU31733

Shifting

EWM00180
WARNING
Before shifting, make sure there are no
swimmers or obstacles in the water near
you.
ECM01610
NOTICE
Warm up the engine before shifting into
gear. Until the engine is warm, the idle
speed may be higher than normal. High
idle speed can prevent you from shifting
back to neutral. If this occurs, stop the
engine, shift to neutral, then restart the
engine and allow it to warm up.
To shift out of neutral
1.
Pull the neutral interlock trigger up (if
equipped).
1. Neutral interlock trigger
2.
Move the remote control lever firmly and
crisply forward (for forward gear) or rear-
ward (for reverse gear) about 35° (a de-
tent can be felt).
To shift from in gear (forward/reverse) to
neutral
1.
Close the throttle so that the engine
slows to idle speed.
2.
After the engine is at idle speed in gear,
move the remote control lever firmly and
crisply to the neutral position.
Operation
39

Advertisement

Table of Contents
loading

This manual is also suitable for:

130b

Table of Contents