Saving And Recalling The System Settings (System Memory); Loading The Stored System Settings - Yamaha RX-V3800 Owner's Manual

Hide thumbs Also See for RX-V3800:
Table of Contents

Advertisement

Available languages

Available languages

4
Press 4k / n repeatedly to select the desired
memory number ("Memory1" to "Memory6")
and then press 4h.
"Save: ENTER" appears in the GUI.
Current
Memory1
Memory2
Memory3
y
• If system settings are already stored in the selected
memory number, the stored system parameter settings
appear in the menu screen.
• If system settings are already saved in the selected
memory number, this unit overwrites to old system
settings.
• If you save the system settings to "Memory1" to
"Memory4", you can load the stored settings by pressing
the corresponding N SYSTEM MEMORY buttons (see
page 99).
Press 4 ENTER to save the current system
5
settings to the selected memory number.
Current
Memory1
Memory2
Memory3
Stored system parameters in the selected
y
You can cancel the saving by pressing 4l.
Press G SET MENU again to exit from GUI
6
screen.
Memory Empty
Save: ENTER
Recital/Opera
SpeakerCH 5/4/0.1
LFE Level 0dB
D-Range
MAX
PEQ
Reset
memory number

Saving and recalling the system settings (System Memory)

Loading the stored system settings

• Before performing the following operations, set the
operation mode selector on the remote control to D AMP.
• This unit overwrites the stored settings to the current
settings of this unit. If you do not want to erase the current
settings, save the current settings to any System Memory
number in advance.
Loading by the N SYSTEM MEMORY
buttons
You can recall the system settings stored in "Memory1" to
"Memory4" by pressing the corresponding
MEMORY buttons.
1
N
Press one of the
buttons on the remote control to select the
desired memory number.
"MEMORY 1 LOAD" (example) appears in the front
panel display.
SYSTEM MEMORY
2
1
y
"EMPTY" appears in front panel display if no system
settings are stored in the selected memory number.
Press the selected N SYSTEM MEMORY
2
button once more to confirm the selection.
This unit loads the settings stored in the selected
memory number.
N
SYSTEM
SYSTEM MEMORY
3
4
99
En

Advertisement

Table of Contents
loading

Table of Contents