Auto Throttle System - Honda EB10000 Owner's Manual

OPERATION
®
AUTO THROTTLE SYSTEM
With the switch in the ON position, engine speed is automatically
reduced when ALL loads are turned OFF or disconnected. When
appliances are turned ON or reconnected, the engine returns to rated
®
speed. In the OFF position, the Auto Throttle system does not
operate. The Auto Throttle system will not respond to electrical loads
of less than 1 ampere or intermittent loads such as a staple gun. Turn
the Auto Throttle switch to the OFF position to operate loads of less
than 1 amp.
Appliances with large start-up power demands may not allow the
engine to reach normal operating rpm when they are connected to the
generator. Push the Auto Throttle switch to the OFF position and
connect the appliance to the generator. If the engine still will not reach
normal operating speed, check that the appliance does not exceed the
rated load capacity of the generator.
To avoid extended warm-up periods, keep the Auto Throttle switch
OFF until the engine reaches operating temperature.
The Auto Throttle system is not effective for use with appliances that
require only momentary power. If the tool or appliance will be turned
ON and OFF quickly, the Auto Throttle switch should be in the OFF
position.
AUTO THROTTLE SWITCH
OFF
OFF
ON
ON
40