Table of Contents
Advertisement
7. Trouble Shooting
Before calling service personnel, please check the following chart for a possible cause to the trouble you are
experiencing.
Perform the adjustments according to the instructions on the "Operating the monitor page".
If the problem you have experienced isn't described below or you can't correct the problem, stop using
the monitor and call service personnel or your dealer.
Problem
No Display
The image is not centered
The image is not locked correctly
If the remote control doesn't work, make
sure the batteries are new and installed
correctly.
The picture color looks poor
Check these things
Ensure the power plug is installed correctly at both ends.
Make sure the signal cable is installed correctly at both ends.
Check that source equipment is operating correctly. Check if
the input signal is compatible with this display.
Check if the input signal is compatible with this display.
Check if the input signal is compatible with this display
Ensure the remote is aimed at the IR sensor on the front of
the display
Check the picture settings and reset the display
Advertisement
Table of Contents
