Breville vkj784 User Manual page 6

Using Your HotCup™ Water Dispenser
Before using your HotCup™ water dispenser for the first time
• Remove your HotCup™ water dispenser carefully from the box. Remove any
packaging and promotional material and position your HotCup™ water dispenser on
a dry, level, secure work surface away from the edge.
• Follow the instructions below on using your HotCup™ water dispenser and discard
the first five measures of boiling water (i.e. the first full tank of water). This will
remove any residues that may remain from the manufacturing process.
Using your HotCup™ water dispenser
Always position your HotCup™ water dispenser in such a way that the start
button cannot be accidentally operated, especially by children. As you use your
HotCup™ water dispenser, a certain portion of the water boiled will be transferred
back to the water reservoir. This will mean the water reservoir may become hot.
Always use care when handling your HotCup™ water dispenser.
1. Press the lid release button.
2. Fill the water reservoir from your cold tap. The water level should be between the
MIN and MAX markings.
3. Close the lid and press the stop button. This will make sure that your HotCup™ water
dispenser will not immediately start a boil cycle when you place it onto the power
base.
4. Connect your HotCup™ water dispenser to a mains supply socket.
5. Place a suitable cup or container with a tea bag, coffee, sugar, etc. below the
dispensing nozzle. Never operate your HotCup™ water dispenser without a cup or
suitable container placed below the dispensing nozzle. Adjust the dispensing control
to the required setting. The control adjusts the quantity of boiling water dispensed
by your HotCup™ water dispenser. For smaller cups like teacups, set the control
towards the setting; for larger cups like coffee mugs, set the control towards the
setting. If you are not sure which setting to use, it's best to use a lower setting until
you gain experience using your HotCup™ water dispenser.
6. Press the start button. The water tank will light up and your HotCup™ water
dispenser will start to boil.
7. The selected quantity of boiling water will be dispensed into the cup. Your HotCup™
water dispenser is now ready to use again. If, after just having boiled, the start button
doesn't stay in the down position, simply wait a few seconds before trying it again.
Stopping your HotCup™ water dispenser
If you have started the boil procedure and then decide you want to stop your HotCup™
water dispenser for any reason, simply press the stop button. You can also stop water
that is being dispensed by pressing the stop button. The boiled water will be safely
transferred back into the water reservoir.
6