Connecting A Pay-Tv/Canal Plus Analogue Decoder; Eight Basic Operations - Getting To Know Your Dvd; Recorder; Inserting A Disc - Sony RDR-HX520 Service Manual

QQ
3 7 63 1515 0

Connecting a PAY-TV/Canal Plus Analogue Decoder

You can watch or record PAY-TV/Canal Plus analogue decoder programmes if you connect a
decoder (not supplied) to the recorder. Disconnect the recorder's mains lead from the mains
when connecting the decoder. Note that when you set "Line3 Input" to "Decoder" in step 5 of
"Setting PAY-TV/Canal Plus analogue programme positions" (page 25), you will not be able
to select "L3" because Line 3 will become a dedicated line for the decoder.
Connecting a decoder
Aerial cable (supplied)
to AERIAL IN
SCART cord
(not supplied)
to AERIAL OUT
to i LINE 1 – TV
TE
L 13942296513
24
10
Select "System" using </,.
11
Press M/m to select an available TV
system, BG, DK, I, or L.
"L" is only available with French RDR-
HX520 and RDR-HX920 models. To
receive broadcasts in France, select "L."
12
Select "Channel" using </,.
13
Select the PAY-TV/Canal Plus
analogue programme position using
M/m or number buttons.
14
Select "PAY-TV/ CANAL+" using </
,.
15
Select "On" using M/m, and press
ENTER.
To return to the previous step
Press O RETURN.
www
b
Note
If you disconnect the recorder's mains lead, you
will not be able to view the signals from the
connected decoder.
.
26
http://www.xiaoyu163.com
PAY-TV/Canal Plus
TV
analogue decoder
to SCART input
SCART cord
(not supplied)
to i LINE 3/DECODER
DVD recorder
x ao u163
y
i
http://www.xiaoyu163.com
2 9
8
Setting PAY-TV/Canal Plus
analogue programme positions
To watch or record PAY-TV/Canal Plus
analogue programmes, set your recorder to
receive the programme positions using the
on-screen display.
In order to set the programme positions
correctly, be sure to follow all of the steps
below.
Number
buttons
SYSTEM
MENU
</M/m/,,
ENTER
O RETURN
1
Press SYSTEM MENU.
The System Menu appears.
2
Select "SETUP," and press ENTER.
3
Select "Video," and press ENTER.
Q Q
3 6 7 1 3 1 5
Eight Basic Operations
— Getting to Know Your DVD Recorder

1. Inserting a Disc

+ +
RW -RW -RW R -R
VR VR
Video
-R
DVD VCD CD DATA DVD
Video
DATA CD
Z (open/
DVD
close)
1
Press DVD.
2
Press Z (open/close), and place a
disc on the disc tray.
Recording/playing side facing down
3
Press Z (open/close) to close the disc
tray.
Wait until "LOAD" disappears from the
front panel display.
Unused DVDs are formatted
automatically.
• For DVD-RW discs
DVD-RWs are formatted in the
recording format (VR mode or Video
mode) set by "Format DVD-RW" in
the "DVD" setup.
• For DVD-R discs
DVD-Rs are automatically formatted in
Video mode. To format an unused
DVD-R in VR mode, format the disc co
using the "Disc Information" display
(page 38) before you make a
recording.
.
If the disc is recordable on this recorder,
you can manually re-format the disc to
make a blank disc (page 38).
1-6
9 4 2 8
4
Select "Scart Setting," and press
ENTER.
5
Press M/m to select "Video" or "RGB"
for "Line1 Output," "Decoder" for
"Line3 Input," and "Video" for "Line3
Output," and press ENTER.
The "Video" setup display appears again.
6
Press O RETURN to return the cursor
to the left column.
7
Select "Basic," and press ENTER.
8
Select "Channel Setting," and press
ENTER.
9
Press M/m to select the desired
programme position, and press
ENTER.
0 5 8 2 9 9 4 2 8
,continued
25
2. Recording a
Programme
HDD + RW -RW -RW + R
VR
Video
-R -R
VR
Video
This section introduces the basic operation to
record a current TV programme to the hard
disk (HDD) or to a disc (DVD). For an
explanation of how to make timer recordings,
see page 40.
HDD DVD
PROG +/–
TV/DVD
DISPLAY
z REC
REC MODE
x REC
STOP
TV t
1
Press HDD or DVD.
If you want to record to a DVD, insert a
recordable DVD.
2
Press PROG +/– to select the
programme position or input source
you want to record.
3
Press REC MODE repeatedly to select
the recording mode.
Each time you press the button, the m
display on the TV screen changes as
follows:
For more details about the recording
mode, see page 40.
,continued
27
9 9
9 9