1. Manuals
  2. Brands
  3. Pioneer Manuals
  4. DVD Player
  5. CB-A802
  6. Service manual

Pioneer CB-A802 Service Manual

Hide thumbs Also See for CB-A802:
Table of Contents

Advertisement

Quick Links

Download this manual
QQ
3 7 63 1515 0

DVD PLAYER

DVD-V8000
RACK MOUNT KIT
CB-A802
TE
L 13942296513
THIS MANUAL IS APPLICABLE TO THE FOLLOWING MODEL(S) AND TYPE(S).
Model
DVD-V8000
KUCXJ
DVD-V8000
WYXJ5
CB-A802
XJ/WL5
www
For details, refer to "Important symbols for good services".
.
PIONEER CORPORATION
PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
PIONEER CORPORATION 2006
http://www.xiaoyu163.com
Type
Power Requirement
AC120 V
AC 220 V to 240 V
–
x
ao
u163
y
i
4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan
http://www.xiaoyu163.com
2 9
8
DVD-V8000
Q Q
3
6 7
1 3
1 5
Region No.
co
.
9 4
2 8
ORDER NO.
RRV3389
XJ/WL5
0 5
8
2 9
9 4
2 8
Remarks
1
2
m
T-ZZR JULY 2006 printed in Japan
9 9
9 9

Advertisement

Table of Contents
loading

Related Manuals for Pioneer CB-A802

Summary of Contents for Pioneer CB-A802

  • Page 1: Dvd Player

    PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A. PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936...

  • Page 2: Safety Information

    The use of a substitute replacement component which does Leakage 0.5mA current Device not have the same safety characteristics as the PIONEER tester under recommended replacement one, shown in the parts list in test this Service Manual, may create shock, fire, or other hazards.
  • Page 3 http://www.xiaoyu163.com 3 7 63 1515 0 This service manual is intended for qualified service technicians ; it is not meant for the casual do-it- yourselfer. Qualified technicians have the necessary test equipment and tools, and have been trained to properly and safely repair complex products such as those covered by this manual. Improperly performed repairs can adversely affect the safety and reliability of the product and may void the warranty.

  • Page 4: Http://Www.xiaoyu163.Com 3

    http://www.xiaoyu163.com 3 7 63 1515 0 [Important Check Points for Good Servicing] In this manual, procedures that must be performed during repairs are marked with the below symbol. Please be sure to confirm and follow these procedures. 1. Product safety Please conform to product regulations (such as safety and radiation regulations), and maintain a safe servicing environment by following the safety instructions described in this manual.
  • Page 5 http://www.xiaoyu163.com 3 7 63 1515 0 ¶ Steps to be taken during repair The steps and care to be taken when Assys are replaced for repair or inspection are described here. First, copy the user setting data to a USB memory device. Before repair, inspection, or downloading of the firmware, the files indicated below must be copied to a USB memory device just in case the user setting data are accidentally reset to default: •...

  • Page 6: Table Of Contents

    7.8.1 IC ..............................130 u163 7.8.2 LCD MODULE ..........................158 7.9 DISC / CONTENT FORMAT PLAYBACK COMPATIBILITY ..............159 8. PANEL FACILITIES ............................160 9. RACK MOUNT KIT (CB-A802) ........................164 9.1 PACKING SECTION ..........................164 9.2 INSTALLATION PROCEDURES ......................166 DVD-V8000 http://www.xiaoyu163.com...

  • Page 7: Specifications

    http://www.xiaoyu163.com 1. SPECIFICATIONS 3 7 63 1515 0 Specifications General Video Input Ω System ............... DVD Player Composite ....BNC x 1, 1.0 Vp-p, 75 (VIDEO IN) Electrical ratings USA and Canada......AC 120 V, 50 Hz/60 Hz Audio Input Ω Europe.......

  • Page 8: Exploded Views And Parts List

    http://www.xiaoyu163.com 2. EXPLODED VIEWS AND PARTS LIST 3 7 63 1515 0 NOTES: Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List. mark found on some component parts indicates the importance of the safety factor of the part. Therefore, when replacing, be sure to use parts of identical designation.
  • Page 9 http://www.xiaoyu163.com PACKING parts List 3 7 63 1515 0 Mark No. Description Part No. Mark No. Description Part No. Remote Control Unit DXX2574 Mirror Mat (850 x 750) DHL1156 NSP 9 Bettery (R6P, AA) VEM1031 Pad (Top) DHA1704 Label (WEEE) See contrast table (2) Pad (Bottom) DHA1703...

  • Page 10: Exterior Section

    http://www.xiaoyu163.com 2.2 EXTERIOR SECTION 3 7 63 1515 0 Refer to "2.4 LOADER MECHA ASSY". 10 6 L 13942296513 Refer to "2.3 FRONT PANEL SECTION". u163 DVD-V8000 http://www.xiaoyu163.com...
  • Page 11 http://www.xiaoyu163.com EXTERIOR SECTION parts List Mark No. Description Part No. Mark No. Description Part No. 3 7 63 1515 0 Cable Packing DEC2885 VJKB Assy DWZ1175 Eject Hole Sheet DEC2891 AJKB Assy DWZ1176 Tray Packing A DEC2894 USBB Assy DWZ1179 Tray Packing B DEC2895 DVDM Assy...

  • Page 12: Front Panel Section

    http://www.xiaoyu163.com 2.3 FRONT PANEL SECTION 3 7 63 1515 0 DVDM CN1502 DVDM Solder DVDM CN1501 the No."4" together CN1504 with the No."7". L 13942296513 u163 DVD-V8000 http://www.xiaoyu163.com...
  • Page 13 http://www.xiaoyu163.com FRONT PANEL SECTION parts List 3 7 63 1515 0 Mark No. Description Part No. KEYB ASSY DWZ1177 PWSB ASSY DWZ1178 FFC (24P) DDD1297 Connector DKN1418 Connector Assy DKP3746 Connector Assy DKP3747 LCD Module DWG1590 Tray Packing C DEC2896 Tray Packing D DEC2897 EMI Sheet A...

  • Page 14: Loader Mecha. Assy

    http://www.xiaoyu163.com 2.4 LOADER MECHA. ASSY 3 7 63 1515 0 Note : Cleaning paper Refer to Refer to GED-008 "2.5 TRAVERSE MECHA. ASSY-S". " Application of Lubricant". To DVDM CN101 (Pickup Assy-S) To DVDM CN104 (Stepping Motor) Daifree To DVDM CN105 (Spindle Motor) GEM1036 Lubricating Oil GYA1001...
  • Page 15 http://www.xiaoyu163.com 3 7 63 1515 0 Application of Lubricant Lubricating Oil GYA1001 Around the shaft No. 9 Loading Base Lubricating Oil GYA1001 Lubricating Oil Lubricating Oil No. 11 GYA1001 GYA1001 Lubricating Oil Drive Cam Inner side of a ditch Inner side of a ditch GYA1001 L 13942296513 No.

  • Page 16: Traverse Mecha. Assy-S

    http://www.xiaoyu163.com 2.5 TRAVERSE MECHA. ASSY-S 3 7 63 1515 0 Cleaning paper GED-008 Cleaning liquid GEM1004 15 (Torque : 0.15 ± 0.01 N•m) Silicone Adhesive GEM1037 DVDM CN101 (Pickup Assy) 4 (Adjustment screw) L 13942296513 Silicone Adhesive GEM1037 Screw Tight 15 (Torque : 0.15 ±...
  • Page 17 http://www.xiaoyu163.com TRAVERSE MECHA. ASSY-S parts List 3 7 63 1515 0 Mark No. Description Part No. Spindle Motor VXM1112 Stepping Motor VXM1113 Pickup Assy-S OXX8018 Skew Screw VBA1091 Skew Spring VBH1335 Guide Bar VLL1514 Sub Guide Bar VLL1515 Leaf Spring VNC1023 Joint Spring VNC1019...

  • Page 18: Block Diagram And Schematic Diagram

    http://www.xiaoyu163.com 3. BLOCK DIAGRAM AND SCHEMATIC DIAGRAM 3 7 63 1515 0 3.1 BLOCK DIAGRAM IC741 16M IC781 64M DVDM ASSY SDRAM SDRAM 36MEBY PD0-PD7 CN602 CN111 IC701 BD0-BD7 OEIC Q602 IC102 IC751 PE5286B BCKA0 TC7W53FU Q101 M65776B ” SPDL LD(650) AD00 IC101...
  • Page 19 http://www.xiaoyu163.com 3 7 63 1515 0 IC902 16M CV IN SDRAM PD0-PD7 PB0-PB9 BCKA0 PC0-PC9 IC901 CD0040AF (P/A/N) AD00 PPD0-PPD7 OSD_RST IC786 LRCKA0 OSD_CS PRO-U IC7301 DOUT0 6dB UP SDA1 OSD_CK PDC084B CSYNC SCL1 OSD_DATA 75 Ω DRIVER OSD OUT OSD_CS,OSD_CLK,OSD_DATA,OSD_RST OSD_RST Cvout...

  • Page 20: Loab Assy And Overall Wiring Diagram

    http://www.xiaoyu163.com 3.2 LOAB ASSY and OVERALL WIRING DIAGRAM 3 7 63 1515 0 LCD MODULE (DWG1590) USBB ASSY (DWZ1179) SYPS ASSY (DWR1401) 1/6 - L 13942296513 DVDM ASSY (DWS1364) AJKB ASSY (DWZ1176) u163 DVD-V8000 http://www.xiaoyu163.com...
  • Page 21 http://www.xiaoyu163.com 3 7 63 1515 0 KEYB ASSY (DWZ1177) PWSB ASSY (DWZ1178) Loading Mecha ASSY (VWT1229) Traverse Mecha SPINDLE ASSY-S MOTOR (VXX3125) (VXM1112) Pickup ASSY-S (OXX8088) L 13942296513 CN601 LOAB LOAB ASSY (VWG2426) S101 CN602 ÷ When ordering service parts, be sure to refer to "EXPLODED VIEWS and PARTS LIST"...

  • Page 22: Dvdm Assy 1/6 [Fts Block]

    http://www.xiaoyu163.com 3.3 DVDM ASSY 1/6 [FTS BLOCK] 3 7 63 1515 0 DVDM ASSY (DWS1364) (1/2) Large size SCH diagram L 13942296513 (RF) : RF SIGNAL ROUTE (RF_V) : RF (VIDEO) SIGNAL ROUTE (RF_A) : RF (AUDIO) SIGNAL ROUTE (AD) : AUDIO DATA SIGNAL ROUTE : FOCUS SERVO LOOP LINE u163...
  • Page 23 http://www.xiaoyu163.com 3 7 63 1515 0 NOTE: The following waveforms were measured at the point of the corresponding balloon number in the schematic diagram and PCB diagram. L 13942296513 1/6, u163 DVD-V8000 http://www.xiaoyu163.com...
  • Page 24 http://www.xiaoyu163.com 3 7 63 1515 0 DVDM ASSY (DWS1364) (2/2) L 13942296513 Large size SCH diagram u163 NOTE: The following waveforms were measured at the point of the corresponding balloon number in the schematic diagram and PCB diagram. DVD-V8000 http://www.xiaoyu163.com...
  • Page 25 http://www.xiaoyu163.com 3 7 63 1515 0 L 13942296513 (AD) (AD) (RF) : RF SIGNAL ROUTE (RF_V) : RF (VIDEO) SIGNAL ROUTE (RF_A) : RF (AUDIO) SIGNAL ROUTE (AD) : AUDIO DATA SIGNAL ROUTE u163 : FOCUS SERVO LOOP LINE : TRACKING SERVO LOOP LINE : STEPPING SERVO LOOP LINE DVD-V8000 http://www.xiaoyu163.com...

  • Page 26: Dvdm Assy 2/6 [Fr Block]

    http://www.xiaoyu163.com 3.4 DVDM ASSY 2/6 [FR BLOCK] 3 7 63 1515 0 DVDM ASSY (DWS1364) (1/2) Large size SCH diagram L 13942296513 u163 DVD-V8000 http://www.xiaoyu163.com...
  • Page 27 http://www.xiaoyu163.com 3 7 63 1515 0 L 13942296513 u163 DVD-V8000 http://www.xiaoyu163.com...
  • Page 28 http://www.xiaoyu163.com 3 7 63 1515 0 DVDM ASSY (DWS1364) (2/2) L 13942296513 u163 CN101 DVD-V8000 http://www.xiaoyu163.com...
  • Page 29 http://www.xiaoyu163.com 3 7 63 1515 0 TC7W53FU-TRB L 13942296513 Large size SCH diagram u163 DVD-V8000 http://www.xiaoyu163.com...

  • Page 30: Dvdm Assy 3/6 [Eby/Av1 Block]

    http://www.xiaoyu163.com 3.5 DVDM ASSY 3/6 [EBY/AV1 BLOCK] 3 7 63 1515 0 DVDM ASSY (DWS1364) (1/2) Large size SCH diagram L 13942296513 u163 DVD-V8000 http://www.xiaoyu163.com...
  • Page 31 http://www.xiaoyu163.com 3 7 63 1515 0 L 13942296513 (VD) (AD) (RF_V) : RF (VIDEO) SIGNAL ROUTE (VD) : VIDEO DATA SIGNAL ROUTE (AD) : AUDIO DATA SIGNAL ROUTE : AUDIO (DIGITAL) SIGNAL ROUTE u163 DVD-V8000 http://www.xiaoyu163.com...
  • Page 32 http://www.xiaoyu163.com 3 7 63 1515 0 DVDM ASSY (DWS1364) (2/2) Large size SCH diagram L 13942296513 u163 DVD-V8000 http://www.xiaoyu163.com...
  • Page 33 http://www.xiaoyu163.com 3 7 63 1515 0 (AD) (VD) (VD) L 13942296513 (RF_V) : RF (VIDEO) SIGNAL ROUTE u163 (VD) : VIDEO DATA SIGNAL ROUTE (AD) : AUDIO DATA SIGNAL ROUTE : AUDIO (DIGITAL) SIGNAL ROUTE DVD-V8000 http://www.xiaoyu163.com...

  • Page 34: Dvdm Assy 4/6 [Video Block]

    http://www.xiaoyu163.com 3.6 DVDM ASSY 4/6 [VIDEO BLOCK] 3 7 63 1515 0 DVDM ASSY (DWS1364) (1/2) (VD) : VIDEO DATA SIGNAL ROUTE : V SIGNAL ROUTE (S_Y) : S_Y SIGNAL ROUTE (S_C) : S_C SIGNAL ROUTE Large size : Y SIGNAL ROUTE SCH diagram (Cb) : Cb SIGNAL ROUTE...
  • Page 35 http://www.xiaoyu163.com 3 7 63 1515 0 (VD) L 13942296513 u163 DVD-V8000 http://www.xiaoyu163.com...
  • Page 36 http://www.xiaoyu163.com 3 7 63 1515 0 (VD) : VI (S_Y) : S_ (S_C) (VD) : S_ (Cb) : Cb (VD) (Cr) (VD) Large size L 13942296513 SCH diagram u163 CN7001 DVD-V8000 http://www.xiaoyu163.com...
  • Page 37 http://www.xiaoyu163.com 3 7 63 1515 0 DVDM ASSY (DWS1364) (2/2) (VD) : VIDEO DATA SIGNAL ROUTE : V SIGNAL ROUTE (S_Y) : S_Y SIGNAL ROUTE (S_C) : S_C SIGNAL ROUTE : Y SIGNAL ROUTE (Cb) : Cb SIGNAL ROUTE (VD) (Cr) : Cr SIGNAL ROUTE (VD)

  • Page 38: Dvdm Assy 5/6 [Usb/Subcpu Block]

    http://www.xiaoyu163.com 3.7 DVDM ASSY 5/6 [USB/SUBCPU BLOCK] 3 7 63 1515 0 DVDM ASSY (DWS1364) (1/2) Large size SCH diagram L 13942296513 u163 : AUDIO (DIGITAL) SIGNAL ROUTE CN8001 DVD-V8000 http://www.xiaoyu163.com...
  • Page 39 http://www.xiaoyu163.com 3 7 63 1515 0 L 13942296513 u163 CN9701 DVD-V8000 http://www.xiaoyu163.com...
  • Page 40 http://www.xiaoyu163.com 3 7 63 1515 0 CN8701 DVDM ASSY (DWS1364) (2/2) L 13942296513 Large size SCH diagram u163 CN9001 DVD-V8000 http://www.xiaoyu163.com...
  • Page 41 http://www.xiaoyu163.com 3 7 63 1515 0 L 13942296513 u163 UDZS5R6(B)-TRB DVD-V8000 http://www.xiaoyu163.com...

  • Page 42: Dvdm Assy 6/6

    http://www.xiaoyu163.com 3.8 DVDM ASSY 6/6 3 7 63 1515 0 DVDM ASSY (DWS1364) L 13942296513 u163 DVD-V8000 http://www.xiaoyu163.com...
  • Page 43 http://www.xiaoyu163.com 3 7 63 1515 0 L 13942296513 u163 DVD-V8000 http://www.xiaoyu163.com...

  • Page 44: Vjkb And Usbb Assys

    http://www.xiaoyu163.com 3.9 VJKB and USBB ASSYS 3 7 63 1515 0 VJKB ASSY (DWZ1175) (1/2) CN901 Large size SCH diagram CN1201 L 13942296513 : V SIGNAL ROUTE (S_Y) : S_Y SIGNAL ROUTE (S_C) : S_C SIGNAL ROUTE : Y SIGNAL ROUTE (Cb) : Cb SIGNAL ROUTE (Cr)
  • Page 45 http://www.xiaoyu163.com 3 7 63 1515 0 CN901 L 13942296513 u163 DVD-V8000 http://www.xiaoyu163.com...
  • Page 46 http://www.xiaoyu163.com 3 7 63 1515 0 VJKB ASSY (DWZ1175) (2/2) : V SIGNAL ROUTE (S_Y) : S_Y SIGNAL ROUTE (S_C) : S_C SIGNAL ROUTE : Y SIGNAL ROUTE (Cb) : Cb SIGNAL ROUTE (Cr) : Cr SIGNAL ROUTE (Ex_V) : Ex_VIDEO SIGNAL ROUTE L 13942296513 Large size SCH diagram...
  • Page 47 http://www.xiaoyu163.com 3 7 63 1515 0 L 13942296513 u163 NOTE: The following waveforms were measured at the point of the corresponding balloon number in the schematic diagram and PCB diagram. DVD-V8000 http://www.xiaoyu163.com...

  • Page 48: Ajkb Assy

    http://www.xiaoyu163.com 3.10 AJKB ASSY 3 7 63 1515 0 AJKB ASSY (DWZ1176) (1/2) CN551 Large size SCH diagram L 13942296513 : AUDIO (DIGITAL) SIGNAL ROUTE (L/R) : AUDIO (ANALOG) SIGNAL ROUTE (ExL/ExR) : Ex_AUDIO SIGNAL ROUTE u163 DVD-V8000 http://www.xiaoyu163.com...
  • Page 49 http://www.xiaoyu163.com 3 7 63 1515 0 NOTE: The following waveforms were measured at the point of the corresponding balloon number in the schematic diagram and PCB diagram. CN1503 L 13942296513 u163 DVD-V8000 http://www.xiaoyu163.com...
  • Page 50 http://www.xiaoyu163.com 3 7 63 1515 0 : AUDIO (DIGITAL) SIGNAL ROUTE AJKB ASSY (L/R) : AUDIO (ANALOG) SIGNAL ROUTE (DWZ1176) (2/2) (ExL/ExR) : Ex_AUDIO SIGNAL ROUTE L 13942296513 Large size SCH diagram u163 NOTE: DVD-V8000 http://www.xiaoyu163.com...
  • Page 51 http://www.xiaoyu163.com 3 7 63 1515 0 L 13942296513 u163 NOTE: The following waveforms were measured at the point of the corresponding balloon number in the schematic diagram and PCB diagram. DVD-V8000 http://www.xiaoyu163.com...

  • Page 52: Keyby And Pwsb Assys

    http://www.xiaoyu163.com 3.11 KEYBY and PWSB ASSYS 3 7 63 1515 0 KEYB ASSY (DWZ1177) CN9501 L 13942296513 u163 DVD-V8000 http://www.xiaoyu163.com...
  • Page 53 http://www.xiaoyu163.com 3 7 63 1515 0 PWSB ASSY (DWZ1178) L 13942296513 u163 DVD-V8000 http://www.xiaoyu163.com...

  • Page 54: Syps Assy

    http://www.xiaoyu163.com 3.12 SYPS ASSY 3 7 63 1515 0 SYPS ASSY (DWR1401) [Figure of reference] • This assembly has no service part. • Please exchange assembly. LIVE NEUTRAL L 13942296513 u163 DVD-V8000 http://www.xiaoyu163.com...
  • Page 55 http://www.xiaoyu163.com 3 7 63 1515 0 L 13942296513 u163 DVD-V8000 http://www.xiaoyu163.com...

  • Page 56: Waveforms

    http://www.xiaoyu163.com 3.13 WAVEFORMS 3 7 63 1515 0 DVDM ASSY Note: The numbers for the waveform photos (circled) are identical to those for the schematic diagrams, PCB diagrams, and troubleshooting flowcharts. IC101-pin3 (RFP) IC201-pin1 (EFMOUT) IC701-pin142 (RERR) CN901-pin26 (Cb) [INTERLACE] V:200 mV/div.
  • Page 57 http://www.xiaoyu163.com 3 7 63 1515 0 DVDM ASSY VJKB ASSY AJKB ASSY Note: The numbers for the waveform photos (circled) are identical to those for the schematic diagrams, PCB diagrams, and troubleshooting flowcharts. DC MODE DC MODE CN551-pin9 (PCMCLK) IC7201-pin2 (MO1) IC8101-pin7 (VOUTL) DC MODE V:500 mV/div.
  • Page 58 http://www.xiaoyu163.com 3 7 63 1515 0 L 13942296513 u163 DVD-V8000 http://www.xiaoyu163.com...

  • Page 59: Pcb Connection Diagram

    http://www.xiaoyu163.com 4. PCB CONNECTION DIAGRAM 4.1 LOAB ASSY 3 7 63 1515 0 NOTE FOR PCB DIAGRAMS : 1. Part numbers in PCB diagrams match those in the schematic 3. The parts mounted on this PCB include all necessary parts for diagrams.

  • Page 60: Dvdm Assy

    http://www.xiaoyu163.com 4.2 DVDM ASSY 3 7 63 1515 0 SIDE A DVDM ASSY LOAB SPINDLE CARRIAGE CN601 MOTOR MOTOR SYSTEM CN115 CN114 CN111 CN103 L 13942296513 CN1201 CN9701 u163 DVD-V8000 http://www.xiaoyu163.com...
  • Page 61 http://www.xiaoyu163.com 3 7 63 1515 0 SIDE A CN101 CN7001 CN401 CN901 IC1402 15 18 16 19 IC202 17 20 IC402 IC403 IC101 Q105 IC401 Q103 Q106 IC1504 IC1001 Q104 L 13942296513 IC304 IC1051 IC1502 Q1504 IC601 IC410 Q1056 IC1501 Q1052 IC1201 IC473...
  • Page 62 http://www.xiaoyu163.com 3 7 63 1515 0 SIDE B DVDM ASSY CN901 CN401 CN103 CN11 C982 IC1102 C392 C408 R389 R9904 3 2 1 R390 R4467 C981 C958 IC902 C1102 C949 L927 C976 R953 D409 R951 C980 C977 C915 C978 R915 R977 C965 R976...
  • Page 63 http://www.xiaoyu163.com 3 7 63 1515 0 SIDE B CN111 CN114 CN115 SIDE B(FIRST) IC1102 C392 IC602 R390 IC902 Q107 C130 R140 IC405 C1513 C361 C409 R401 L1576 IC6001 IC404 Q108 L1575 R114 IC351 L1574 IC351 Q102 L1573 C407 IC903 Q601 C104 L1572 C406...

  • Page 64: Ajkb Assy

    http://www.xiaoyu163.com 4.3 AJKB ASSY 3 7 63 1515 0 SIDE A AJKB ASSY DWZ1176- C8009 C8007 C8002 C8001 DWM2222- JC IC8802 R8020 R8018 CN8001 CN8701 R8016 8.GND 16.GND 24.V+12 8.GND 16.JAMMAC 24.V+5D R8014 7.BCK 15.MD 23.V+12 7.SYNC_IN 15.JAMMAD 23.V+5D 6.GND 14.GND 22.V+3D C8604...
  • Page 65 http://www.xiaoyu163.com 3 7 63 1515 0 SIDE A DWZ1176- AJKB Production code DWM2222- JCKB DNP2204- C8604 C8106 C8107 C8202 D8601 C8230 C8231 C8222 C8223 IC8101 IC8203 IC8202 IC8205 C8225 C8220 C8209 L 13942296513 Word Side C8109 C8603 C8730 Q8701 C8110 C8108 D8509 IC8201...
  • Page 66 http://www.xiaoyu163.com 3 7 63 1515 0 SIDE B AJKB ASSY 0 1 2 3 0 1 2 3 4 5 6 7 8 9 L 13942296513 u163 DVD-V8000 http://www.xiaoyu163.com...
  • Page 67 http://www.xiaoyu163.com 3 7 63 1515 0 SIDE B L 13942296513 (DNP2204-B) u163 DVD-V8000 http://www.xiaoyu163.com...

  • Page 68: Vjkb And Usbb Assys

    http://www.xiaoyu163.com 4.4 VJKB and USBB ASSYS 3 7 63 1515 0 SIDE A VJKB ASSY L 13942296513 IC7301 IC7201 IC7202 IC7101 IC7701 Q7701 IC7601 Q7901 IC7302 Q7904 NOTE : The encircled numbers denote measuring point. u163 DVD-V8000 http://www.xiaoyu163.com...
  • Page 69 http://www.xiaoyu163.com 3 7 63 1515 0 SIDE A USBB ASSY KN9701 JA9702 GND +5V_U1 +5V_U2 V+3D CN9701 CN901 DWZ1179- USBB L 13942296513 (DNP2204-B) CN9701 CN1201 (DNP2204-B) 7701 IC7601 u163 DVD-V8000 http://www.xiaoyu163.com...
  • Page 70 http://www.xiaoyu163.com 3 7 63 1515 0 SIDE B VJKB ASSY L 13942296513 u163 DVD-V8000 http://www.xiaoyu163.com...
  • Page 71 http://www.xiaoyu163.com 3 7 63 1515 0 SIDE B USBB ASSY L 13942296513 (DNP2204-B) CN9701 (DNP2204-B) u163 DVD-V8000 http://www.xiaoyu163.com...

  • Page 72: Keyb And Pwsb Assys

    http://www.xiaoyu163.com 4.5 KEYB and PWSB ASSYS 3 7 63 1515 0 SIDE A PWSB ASSY DWZ1178- PWSB CN9501 1.GND 2.POWER_SW 3.POWER_LED D9501 4.V+5E S9501 D9505 (DNP2235-A) CN9501 CN1504 CN90001 CONTACT SIDE UPPER IC9001 KEY LOCK L 13942296513 D9004 DWZ1177- KEYB CN9001 S9045 DISPLAY...
  • Page 73 http://www.xiaoyu163.com 3 7 63 1515 0 SIDE A KEYB ASSY Production code TOP MENU 9001 N1504 MENU S9011 90001 S9023 S9021 ENTER UPPER L 13942296513 9002 S9015 S9014 S9013 SETUP RETURN S9025 S9022 S9024 S9012 19.PLAY_LED KEY_OUT3 20.V+5E 21.KEYLOCK_LED KEY_OUT4 22.POWER_LED 23.V+5D KEY_OUT5...
  • Page 74 http://www.xiaoyu163.com 3 7 63 1515 0 SIDE B KEYB ASSY Q9503 Q9502 0 1 2 3 0 1 2 3 4 5 6 7 8 9 Q9501 MENU TOP MENU L 13942296513 ENTER RETURN SETUP Q9015 Q9005 Q9013 Q9012 Q9011 Q9004 Q9014 Q9001...
  • Page 75 http://www.xiaoyu163.com 3 7 63 1515 0 SIDE B PWSB ASSY R9502 Q9503 Q9502 Q9501 R9503 C9503 R9501 DWZ1178- PWSB (DNP2235-A) CN9501 CN90001 KEY LOCK L 13942296513 DISPLAY DWZ1177- KEYB CN9002 1.GND 2.POWER_SW 3.POWER_LED DWM2262- FRKB 4.V+5E DNP2235- (DNP2235-A) u163 DVD-V8000 http://www.xiaoyu163.com...

  • Page 76: Syps Assy

    http://www.xiaoyu163.com 4.6 SYPS ASSY 3 7 63 1515 0 SIDE A SIDE B SYPS ASSY [DWR1401] AC INLET ASSY L 13942296513 CN101 CN101 u163 CN401 DVD-V8000 http://www.xiaoyu163.com...

  • Page 77: Pcb Parts List

    http://www.xiaoyu163.com 5. PCB PARTS LIST 3 7 63 1515 0 NOTES: Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List. mark found on some component parts indicates the importance of the safety factor of the part. Therefore, when replacing, be sure to use parts of identical designation.
  • Page 78 http://www.xiaoyu163.com Mark No. Description Part No. Mark No. Description Part No. 3 7 63 1515 0 C0230, C0236, C0253, C0256, C0258 CKSRYF105Z10 L0927, L1001, L1002, L1055–L1059 CTF1305 C0265, C0299, C0319, C0328, C0329 CKSRYF105Z10 L1101, L1201, L1244, L1501–L1508 CTF1305 C0390, C0393, C0409, C0411 CKSRYF105Z10 L1566–L1593 CTF1306...
  • Page 79 http://www.xiaoyu163.com Mark No. Description Part No. Mark No. Description Part No. 3 7 63 1515 0 VR0001 Variable Resistor(10 k) CCP1396 CAPACITORS C7001,7602 CKSRYF105Z10 Other Resistors RS1/16S###J C7002,7306 CKSRYB102K50 C7101–7106,7505 CKSRYB104K16 C7107–7110,7201,7202 CKSRYB105K6R3 MISCELLANEOUS C7111,7207,7208,7308 CEVW101M16 CN0103 PH CONNECTOR 5P AKM1276 CN1501 PH CONNECTOR 6P AKM1277...
  • Page 80 http://www.xiaoyu163.com Mark No. Description Part No. Mark No. Description Part No. 3 7 63 1515 0 RESISTORS D9031–9035,9041–9045 1SS355 R8201, 8206, 8209, 8217 RN1/16SE4302D R8202, 8204, 8212, 8215 RN1/16SE2202D MISCELLANEOUS R8727 RS1/10S75R0F R8901 RS1/10S0R0J S9011–9015,9021–9025 SW VSG1024 Other Resistors RS1/16S###J S9031–9035,9041–9045 SW VSG1024 CN9001 24P FFC CONNECTOR...

  • Page 81: Adjustment

    http://www.xiaoyu163.com 6. ADJUSTMENT 3 7 63 1515 0 6.1 ADJUSTMENT ITEMS AND LOCATION Adjustment Items Adjustment Points (Mechanism Part) [Mechanism Part] Cautions: After adjustment, adjustment screw locks with the Tangential and Radial Height Coarse Adjustment Screw tight. DVD Jitter Adjustment Tangential Radial adjustment...

  • Page 82: Necessary Adjustment Points

    http://www.xiaoyu163.com 6.3 NECESSARY ADJUSTMENT POINTS 3 7 63 1515 0 When Adjustment Points Exchange Parts of Mechanism Assy ∗ After adjustment, screw locks Mechanical ~, Ÿ, ! Exchange the Pickup point with the Screw tight. Electric point Mechanical Exchange the Traverse Mechanism point Electric point...

  • Page 83: Test Mode

    http://www.xiaoyu163.com 6.4 TEST MODE 3 7 63 1515 0 TEST MODE: ON TEST POWER GGF1381 Test mode remote control unit TEST MODE: DISC SET CHECK <TRAY OPEN> DVD, CD DVD disc REP • A REP • A &&& DSC - TEST MODE: PLAY L 13942296513 <PLAY>...

  • Page 84: Mechanism Adjustment

    http://www.xiaoyu163.com 6.5 MECHANISM ADJUSTMENT 3 7 63 1515 0 Tangential and Radial Height Coarse Adjustment START Cautions: • Remove the Loading Mecha. Assy. Keep spacer for future use. • Remove a Spacer for height adjustment (used only for 2003 models) attached to the back side (shaded area) of the Loading Mecha.
  • Page 85 http://www.xiaoyu163.com 3 7 63 1515 0 DVD Jitter Adjustment • Playback method of inner and outer address for the purpose is refererd to "6.4 TEST MODE". • Jitter indication of the monitor is refererd to "7.1.2 TEST MODE SPECIFICATIONS". Use disc: GGV1025 START Traverse •...

  • Page 86: Electrical Adjustment

    http://www.xiaoyu163.com 6.6 ELECTRICAL ADJUSTMENT 3 7 63 1515 0 Note: If adjustments of the Traverse mechanism are inappropriate: • The magnitude of jitter and the error rate increase. • The playability of a disc is deteriorated. • In some cases, block noise may appear. Measuring and Adjustment Points SIDE A DVDM ASSY...

  • Page 87: General Information

    http://www.xiaoyu163.com 7. GENERAL INFORMATION 3 7 63 1515 0 7.1 DIAGNOSIS 7.1.1 SELF-DIAGNOSIS FUNCTION OF PICKUP DEFECTIVE This unit can confirm the laser diode current value (DVD: 650 nm, CD: 780 nm) of pickup on the Test Mode screen. (Press the ESC → TEST keys in order on the test mode remote control unit (GGF1381) to enter the test mode.) It's effective in case of the following condition.

  • Page 88: Test Mode Specifications

    http://www.xiaoyu163.com 7.1.2 TEST MODE SPECIFICATIONS 3 7 63 1515 0 Display Specification of the Test Mode Character in bold : Item name : Information display 13 14 19 20 - Jitter value [J – ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗] 1 Address indication The address being traced is displayed in number.
  • Page 89 http://www.xiaoyu163.com Test Mode Functional Specification 3 7 63 1515 0 1 Test mode entry In the power ON state, press the [ESC] (A8-5F) key and [TEST] (A8-5E) key in order of the Test mode remote control unit. • Light the LCD and all LEDs, and goes out the LCD and LEDs when pressing the keys of something. •...

  • Page 90: Self-Diagnosis Function

    http://www.xiaoyu163.com 7.1.3 SELF-DIAGNOSIS FUNCTION 3 7 63 1515 0 SELF-DIAGNOSIS Two types of self-diagnosis are provided with this unit: (1) Self-diagnosis that is performed each time the power is turned on (2) Self-diagnosis upon request, activated using the remote control unit 1.
  • Page 91 http://www.xiaoyu163.com In a case of an error for Item 6 In a case of an error for Item 0 3 7 63 1515 0 AV DECODER T-REX REG. ACCESS NG ACCESS NG In a case of an error for Item 7 In a case of an error for Item - AV DECODER SYSCON SRAM...

  • Page 92: Functional Specification Of The Service Mode

    http://www.xiaoyu163.com 7.1.4 FUNCTIONAL SPECIFICATION OF THE SERVICE MODE 3 7 63 1515 0 • LCD indication of EDC / ID error (short cut function) Indicate it in LCD with the "ESC"+"CX" keys (LD remote control unit). Indication is released with the "ESC" key during display. LCD indication contents 0 0 / 0 0 / 0 1 ∗...

  • Page 93: Error Display

    http://www.xiaoyu163.com 7.1.5 ERROR DISPLAY 3 7 63 1515 0 Error codes that are displayed on the LCD display without using the remote control unit LCD Display Possible causes Operation of the unit The sound may not out with AV1 VER AV-1 chip is not a match with the program of system controller the specific audio.
  • Page 94 http://www.xiaoyu163.com 3 7 63 1515 0 Description of Causes if with a DVD Causes if with a CD Operation of the Unit Error 39 SGC converge SGC could not converge during detects the peak Open timeout The unit did not enter Stop mode within 10 seconds of issuance of a Stop command. 41 Spindle timeout Stop Disc distinction is not completed even if passes for 10 seconds after the spindle turned.
  • Page 95 http://www.xiaoyu163.com Description of 3 7 63 1515 0 Causes if with a DVD Causes if with a CD Operation of the Unit Error Subcode check Subcode could not be read within 1 Open (Subcode readout second after the tracking on. failure during startup failure) A command could not be issued to DSP because...

  • Page 96: Error History

    http://www.xiaoyu163.com 7.1.6 ERROR HISTORY 3 7 63 1515 0 How to display the error history Use the dedicated remote control unit for service. Press the ESC then CHP/TIM keys. The measured error rate value, results of self-diagnosis, and time data read from the real-time clock are displayed on the screen, as shown below: Press the CHP/TIM key again to display the detailed information of the error history and results of self-diagnosis.
  • Page 97 http://www.xiaoyu163.com How to clear data of the error history 3 7 63 1515 0 The data of the error history can be cleared by issuing the "EE0016EC" RS-232C command. How to copy data of the error history to a USB memory device The data of the error history can be copied to a USB memory device, using SAVE ERROR LOG in the ADV.SETUP menu.

  • Page 98: Accumulated Power-On Time And Playback Time

    http://www.xiaoyu163.com 7.1.7 ACCUMULATED POWER-ON TIME AND PLAYBACK TIME 3 7 63 1515 0 Displaying the accumulated power-on time and playback time The accumulated power-on time and playback time are displayed on the screen and the LCD when the POWER key on the main unit is pressed while the DISPLAY key is held pressed.

  • Page 99: Trouble Shooting

    http://www.xiaoyu163.com 7.1.8 TROUBLE SHOOTING 3 7 63 1515 0 START Power ON • Remote control unit or IR signal line damaged. (When key input of the remote control unit is not completed) • Blow out fuse of the primary side •...
  • Page 100 http://www.xiaoyu163.com 3 7 63 1515 0 • Check the following connections and FTS drive IC (IC351) : DVDM Assy CN114 (4P flexible cable) Carriage does not move. Check the Stepping motor signals, IC351-pin 31, 32, 34, 35 and IC601-pin 47, 48. (Stepping positioning) •...

  • Page 101: Power On Sequence

    http://www.xiaoyu163.com 7.1.9 POWER ON SEQUENCE 3 7 63 1515 0 Sequences after power is on Power ON Flash check An error indication is displayed on the LCD. If the indication is "FLASH SUM" or "FLASH ID," connect the dedicated cable for downloading to the 15-pin D-SUB connector and download the firmware.
  • Page 102 http://www.xiaoyu163.com 3 7 63 1515 0 Is it a start time programmed by the timer? Set the address of the target. Is the Power-on-Start setting made? Set the address of the target. Tray open? : If there is a problem in closing of the tray, Tray close an error indication is displayed on the LCD.

  • Page 103: Failure Judgment Of The Hdmi Transmitter Ic

    Does the monitor support HDCP? Check if there is any problem with the initialization processes, including HDCP initialization. (Connect a Pioneer plasma Purpose: display that is equipped with the HDMI input for checking. To check if there is any problem with the HDMI output line The HDMI-DVI conversion cable is required for the connection.)

  • Page 104: Upgrading

    http://www.xiaoyu163.com 7.2 UPGRADING 7.2.1 UPGRADING OF THE FIRMWARE 3 7 63 1515 0 Upgrading of the firmware is performed, using the CD-R for upgrading. 1 Install the CD-R for upgrading in the tray and press the STOP/OPEN/CLOSE key on the main unit or the OPEN/CLOSE key on the remote control unit.

  • Page 105: If Upgrading Of The Firmware Fails

    http://www.xiaoyu163.com 7.2.2 IF UPGRADING OF THE FIRMWARE FAILS 3 7 63 1515 0 SERIAL DOWNLOAD [Purposes] If upgrading of the firmware (using the CD-R) fails, upgrading via the serial port is required. This method of upgrading is explained here. [Tools to be used] [Connection] Connect as follows: •...

  • Page 106: Setting The Destination

    http://www.xiaoyu163.com 7.3 SETTING THE DESTINATION 3 7 63 1515 0 In conventional models, as many number of sub-microcomputer units as that of destinations were designed, because a port set for each destination was provided with a sub-microcomputer unit. However, with this model, the sub-microcomputer unit is common to all destinations.

  • Page 107: Setting The Id Number And Copying The Id Data

    http://www.xiaoyu163.com 7.4 SETTING THE ID NUMBER AND COPYING THE ID DATA 3 7 63 1515 0 The ID number is stored in the flash memory on the DVDM Assy and the EEPROM on the AJKB Assy. The ID data are stored in the EEPROM on the AJKB Assy.

  • Page 108: Serial Number Setting

    http://www.xiaoyu163.com 7.5 SERIAL NUMBER SETTING 3 7 63 1515 0 The serial number of this unit is stored in the EEPROM on the AJKB Assy. When the AJKB Assy is replaced, serial number setting is also required. The remote control unit for service is used for setting. How to set Press ESC then the 9 key to enter Serial Number Setting mode.

  • Page 109: Disassembly

    http://www.xiaoyu163.com 7.6 DISASSEMBLY 3 7 63 1515 0 Note 1: Do NOT look directly into the pickup lens. The laser beam may cause eye injury. Note 2: Even if the unit shown in the photos and illustrations in this manual may differ from your product, the procedures described here are common.
  • Page 110 http://www.xiaoyu163.com 3 7 63 1515 0 Front Panel Section Disconnect the one flexible cable. Disconnect the two connectors. Remove the one screw. Unhook the five hooks. 1 2 2 CN1502 CN1504 CN1501 DVDM Assy L 13942296513 Bottom view Remove the front panel section. Front panel section u163 DVD-V8000...
  • Page 111 http://www.xiaoyu163.com 3 7 63 1515 0 AJKB Assy Remove the three screws. Remove the two screws. Remove the two hex. screws. Remove the two hex. screws. Rear view Remove the one screw. AJKB Assy Remove the PCB spacer. Remove the AJKB Assy. DVDM Assy Remove the one screw.
  • Page 112 http://www.xiaoyu163.com 3 7 63 1515 0 Diagnosis Connect the jig flexible cable 24P and extension board. Insulation AJKB Assy Insert the two insulation sheet. sheet DVDM Assy Arrange the unit as shown in the photo. Insulation sheet Diagnosis CN1504 CN1501 CN1502 Extension board (GGF1575)
  • Page 113 http://www.xiaoyu163.com 3 7 63 1515 0 LOADER MECHA. Assy LOADER MECHA. Assy Note: For clarity, the front panel section was removed for the photo, but the actual work can be done without removing it. Remove the five screws. Remove the mecha. case (top). Mecha.
  • Page 114 http://www.xiaoyu163.com 3 7 63 1515 0 Disconnect the three flexible cables, and the one connector. CN103 CN115 CN114 CN111 DVDM Assy L 13942296513 Remove the four screws. Remove the LOADER MECHA. Assy. LOADER MECHA. Assy u163 DVD-V8000 http://www.xiaoyu163.com...
  • Page 115 http://www.xiaoyu163.com 3 7 63 1515 0 Bridge and Tray Remove the one screw. Remove the bridge. Pull out the tray, then remove it by pressing the hook. Hook Bridge Tray Note when reinserting the tray Drive cam When reinserting the tray, first align the triangle printed on the loading base and the pin of the drive cam, then L 13942296513 insert the tray.
  • Page 116 http://www.xiaoyu163.com Traverse Mecha. Assy-S 3 7 63 1515 0 Flexible cable Dislodge the flexible cables from their factory for the spindle motor Front side placement. Flexible cable Flexible cable Bottom view for the pickup for the stepping motor L 13942296513 Cleaning paper GED-008 Cleaning liquid...
  • Page 117 http://www.xiaoyu163.com Pickup Assy-S 3 7 63 1515 0 Front side Note: The Pickup Assy-S can be removed without removing the Traverse Mecha. Assy-S. (shown as Step π.) Dislodge the flexible cable for the pickup from its packaged placement. Remove the flexible cable for the pickup. Flexible cable for the pickup Bottom view L 13942296513...
  • Page 118 http://www.xiaoyu163.com Remove the two screws. 3 7 63 1515 0 Pickup Assy-S Note: The screws are secured with the silicone adhesive. Make sure to apply the silicone adhesive after reattaching the screws. Leaf spring Joint spring Silicone adhesive GEM1037 Joint 03 Silicone adhesive GEM1037 Arrangement of the flexible cable...
  • Page 119 http://www.xiaoyu163.com 3 7 63 1515 0 Arrangement of the flexible cable (use a 24P flexible cable: VDA2135) for the pickup : Conductive surface Note: Be sure to move the Pickup Assy-S to the innermost perimeter. Pass the flexible cable below the hook, and fold it back. Fold the flexible cable inward at the position of the reference line.

  • Page 120: Pin Function Of The Pcb Assy

    http://www.xiaoyu163.com 7.7 PIN FUNCTION OF THE PCB ASSY 3 7 63 1515 0 Internal Connection (1) CN7001 (VKN1433): VJKB Assy → CN901 (VKN1433): DVDM Assy No. I/O Pin Name Pin Function No. I/O Pin Name Pin Function − LETTER 0 V: OFF, 3.3 V: ON V.ENCout Cr SQEEZE 0 V: OFF, 3.3 V: ON...
  • Page 121 http://www.xiaoyu163.com 3 7 63 1515 0 (3) CN8701 (VKN1814): AJKB Assy → CN1503 (VKN1510): DVDM Assy No. I/O Pin Name Pin Function No. I/O Pin Name Pin Function V+3E EVER+3.3 V SEL_RS H: D-SUB 15 pin, L: D-SUB 9 pin RTC_CS Chip select signal for RTC POWER_IN...
  • Page 122 http://www.xiaoyu163.com 3 7 63 1515 0 External Connection (1) JA7501 (DKN1267): VJKB Assy → Video output products No. I/O Pin Name Pin Function No. I/O Pin Name Pin Function − Ext In Video Composite Video in: 1 Vp-p GNDA (2) JA7502 (VKB1122): VJKB Assy → Composite Video Monitor No.
  • Page 123 http://www.xiaoyu163.com 3 7 63 1515 0 (9) JA8701 (DKN1400): AJKB Assy → Black Burst signal generator No. I/O Pin Name Pin Function No. I/O Pin Name Pin Function Ext_sync IN1 Ext-sync (Black burst) Ext_sync IN2 Ext-sync (Black burst) − − GNDD GNDD (10) CN8702 (DKN1435): AJKB Assy →...
  • Page 124 http://www.xiaoyu163.com 3 7 63 1515 0 Internal Connection and Pin Function of the DVDM Assy (DWS1364) • Block Diagram IC781 IC902 16M IC741 16M SDRAM SDRAM SDRA M 16ME BY PD0- PD7 Q602 PB0- PB9 LD(650) PC0- PC9 IC701 BCKA0 IC751 LD(780) IC901...
  • Page 125 http://www.xiaoyu163.com 3 7 63 1515 0 Pin (Signal) Function of the DVDM Assy (DWS1364) (1) CN401 (AKM1284) For power supply input No. Pin Name Pin Function No. Pin Name Pin Function − − EV6V(B) +6 V power supply Ground − −...
  • Page 126 http://www.xiaoyu163.com 3 7 63 1515 0 (5) CN111 (VKN2045) For pickup connection No. Pin Name Pin Function No. Pin Name Pin Function − GNDD Ground VRCOM Monitoring voltage − +5 V power supply VR780 Monitor diode VR for CD − PU-B3 input GNDD Ground...
  • Page 127 http://www.xiaoyu163.com 3 7 63 1515 0 (9) CN1201 (AKM1283) For USBB Assy connection No. Pin Name Pin Function No. Pin Name Pin Function − − GNDD Ground +5V_U2 CH2 +5 V supply line − − V+3A +3 V power supply +5V_U2 CH2 +5 V supply line −...
  • Page 128 http://www.xiaoyu163.com 3 7 63 1515 0 (13) CN551 (VKN1510) For AJKB Assy connection (audio) No. Pin Name Pin Function No. Pin Name Pin Function XAMUTE Audio mute signal Audio DAC mode clock signal − ASEL Audio select signal Ground LRCK L/R clock signal Audio DAC mode data signal −...
  • Page 129 http://www.xiaoyu163.com 3 7 63 1515 0 The selecting signal logic of the principal switch section ¶ Clock generator input frequency ¶ Monitor output switch Sampling Input of Clock Generator Monitor Output 44.1 KHz External monitor 44 x 48 VSEL1 48 KHz ¶...

  • Page 130: Parts

    http://www.xiaoyu163.com 7.8 PARTS 7.8.1 IC 3 7 63 1515 0 ¥ The information shown in the list is basic information and may not correspond exactly to that shown in the schematic diagrams. List of IC LA9704WS1, PD6345A, PE5286B, M65776BFP, PD0280B, CD0040AF, SII9190CTG64, UHC124BF, PE5557B, LC78652W LA9704WS1 (DVDM ASSY: IC101) •...
  • Page 131 http://www.xiaoyu163.com 3 7 63 1515 0 Pin Name Pin Functions TESI TES comparator input TES output Deffect detection BHMIX PH, BH, wobble switching output BHACI BH–AC input RF bottom detection output RF peak detection output Capacitor connection terminal for DC cut ISET Resistor connection terminal for BPF center frequency setting BCAI...
  • Page 132 http://www.xiaoyu163.com 3 7 63 1515 0 PD6345A (DVDM ASSY: IC601) • FR Pin Function Pin Name Pin Functions I/O Data bus I/O Data bus I/O Data bus I/O Data bus I/O Data bus I/O Data bus I/O Data bus I/O Data bus I/O Data bus I/O Data bus I/O Data bus...
  • Page 133 http://www.xiaoyu163.com 3 7 63 1515 0 Pin Name Pin Functions LODRV D/A Loading, motor drive SEL_TV A/D NTSC/PAL/AUTO switching signal A/D Not used A/D Not used XOEM A/D OEM model protection input LDREAD A/D Input for LD current value indication A/D Not used A/D Not used LODPOS...
  • Page 134 http://www.xiaoyu163.com 3 7 63 1515 0 Pin Name Pin Functions LOAD_ON FLASH MEMORY write protect release − 100 GND Ground 101 XPROURST VIDEO reset signal 102 VOFF VIDEO amplifier mute signal 103 HDMIRST Reset signal of HDMI CONT 104 SY_SEL External sync.
  • Page 135 http://www.xiaoyu163.com 3 7 63 1515 0 Pin Name Pin Functions 149 XCSFLSH Chip select output to Flash ROM 150 XCSAV1 Chip select of the AV-1 CHIP 151 XCSEBY Chip select of the EBY Chip 152 XCS3 Chip select of the servo DSP 153 XCSSRAM Chip select of the 4M SRAM −...
  • Page 136 http://www.xiaoyu163.com 3 7 63 1515 0 PE5286B (DVDM ASSY: IC701) • EBY-Chip IC Pin Function Pin Name Pin Function − Ground − Ground − VDD3.3 Power supply (+ 3.3 V) DMCK System clock of the DVD/CD-ROM decoder DMACKI 33 MHz input BUNRI GND fixed −...
  • Page 137 http://www.xiaoyu163.com 3 7 63 1515 0 Pin Name Pin Function − VDD3.3 Power supply (+ 3.3 V) − Ground − Not used − VDD2.5 Power supply (+ 2.5 V) − VDD3.3 Power supply (+ 3.3 V) Data bus 6 for DRAM Data bus 5 for DRAM Data bus 4 for DRAM Data bus 3 for DRAM...
  • Page 138 http://www.xiaoyu163.com 3 7 63 1515 0 Pin Name Pin Function − 103 VDD3.3 Power supply (+ 3.3 V) − 104 VDD2.5 Power supply (+ 2.5 V) − 105 GND Ground − 106 GND Ground − 107 VDD3.3 Power supply (+ 3.3 V) 108 SAD3 Data bus D11 −...
  • Page 139 http://www.xiaoyu163.com 3 7 63 1515 0 Pin Name Pin Function − 156 GND Ground − 157 VDD2.5 Power supply (+ 2.5 V) − 158 VDD3.3 Power supply (+ 3.3 V) 159 ATC Output a direct current error of a RF signal as a PWD pulse 160 ASC Output frequency error of a sync period as a PWD pulse 161 XRESET...
  • Page 140 http://www.xiaoyu163.com 3 7 63 1515 0 M65776BFP (DVDM ASSY: IC751) • AV-1 IC Pin Function Pin Name Pin Function − Ground BCLK Strobe signal of BD pin BDEN Ground fixed BDREQ Data request signal BSECH Ground fixed I/O Data bus I/O Data bus I/O Data bus I/O Data bus...
  • Page 141 http://www.xiaoyu163.com 3 7 63 1515 0 Pin Name Pin Function − Ground XDREQ 1 DMA request signal for OSD bit map transfer XDACK10 DMA acknowledge signal for OSD bit map transfer Address bus 3 for SDRAM Address bus 4 for SDRAM Address bus 2 for SDRAM −...
  • Page 142 http://www.xiaoyu163.com 3 7 63 1515 0 Pin Name Pin Function − 103 VDD18 Power supply (+ 1.8 V) − 104 VDD33 Power supply (+ 3.3 V) − 105 CLKO Not Used 106 27MAV1 System clock input (27 MHz) − 107 AVDD18 Analog power supply (+ 1.8 V) −...
  • Page 143 http://www.xiaoyu163.com 3 7 63 1515 0 Pin Name Pin Function − 156 VDD33 Power supply (+ 3.3 V) 157 PDR[8] Not Used 158 PDR[9] Not Used 159 LRCLK Clock for channel distinction (L/R) of PCM audio data 160 CDLRCK L/R clock which is input from CDDSP 161 CDBCK PCM bit clock which is input from CDDSP 162 CDDATA...
  • Page 144 http://www.xiaoyu163.com 3 7 63 1515 0 PD0280B (DVDM ASSY: IC1001) • T-REX IC Pin Function Pin Name Pin Functions − Digital ground XTCK1 Test exclusive use input pin Test exclusive use input pin XTST Test exclusive use input pin Test exclusive use input pin SMCK Test exclusive use input pin Color signal input...
  • Page 145 http://www.xiaoyu163.com 3 7 63 1515 0 Pin Name Pin Functions I/O I2C data I/O I2C clock input − Digital ground NRST System reset input TEST0 Test exclusive use input pin (Connect to ground) TEST1 Test exclusive use input pin (Connect to ground) TEST2 Test exclusive use input pin (Connect to ground) TEST3...
  • Page 146 http://www.xiaoyu163.com 3 7 63 1515 0 Pin Name Pin Functions QCLK Video clock output − 100 VDDI VDD for Core (+ 2.5 V) − 101 VSS Digital ground 102 EXCLK Video clock input in external PLL use − 103 OVDDE3 VDD for I/O (+ 3.3 V) 104 PH1 Signal output 1 for external PLL comparator...
  • Page 147 http://www.xiaoyu163.com 3 7 63 1515 0 CD0040AF (DVDM ASSY: IC901) • PRO-U (Video Encoder) IC Pin Function Pin Name Pin Functions − OVDD VDD for I/O (+ 3.3 V) CLKI 27 MHz clock input TEST7 Test input (connect to ground) PLL_EN PLL enable input I/O ITU-R BT.656/601 input...
  • Page 148 http://www.xiaoyu163.com 3 7 63 1515 0 Pin Name Pin Functions ANSI/SMPTE293M output (Y) ANSI/SMPTE293M output (Y) ANSI/SMPTE293M output (Y) ANSI/SMPTE293M output (Y) − OVDD VDD for I/O (+ 3.3 V) − CVSS Digital ground for core − OVSS Digital ground for I/O ANSI/SMPTE293M output (Cb/Cr) ANSI/SMPTE293M output (Cb/Cr) ANSI/SMPTE293M output (Cb/Cr)
  • Page 149 http://www.xiaoyu163.com 3 7 63 1515 0 Pin Name Pin Functions − OVSS Digital ground for I/O 100 RAS Command output of SDRAM Row Address Strobe 101 DQM SDRAM DQM output 102 CAS Command output of SDRAM Column Address Strobe 103 MCLK SDRAM clock output (54 MHz) 104 WE SDRAM Write Enable output...
  • Page 150 http://www.xiaoyu163.com 3 7 63 1515 0 SII9190CTG64 (DVDM ASSY: IC1051) • HDMI Transmitter IC Pin Function Pin Name Pin Functions − Digital VCC (+ 3.3 V) 12 bit input pixel data bus 12 bit input pixel data bus Data enable HSYNC Horizontal sync input control signal VSYNC...
  • Page 151 http://www.xiaoyu163.com 3 7 63 1515 0 Pin Name Pin Functions 12 bit input pixel data bus 12 bit input pixel data bus − Digital ground − Digital VCC (+ 3.3 V) 12 bit input pixel data bus 12 bit input pixel data bus 12 bit input pixel data bus 12 bit input pixel data bus 12 bit input pixel data bus...
  • Page 152 http://www.xiaoyu163.com 3 7 63 1515 0 UHC124BF (DVDM ASSY: IC1201) • USB Driver IC Pin Function Pin Name Pin Functions − 3.3 V power supply Address bus Address bus Address bus Address bus Address bus Address bus Address bus Address bus Address bus Address bus Address bus...
  • Page 153 http://www.xiaoyu163.com 3 7 63 1515 0 Pin Name Pin Functions I/O Data bus I/O Data bus − 3.3 V power supply − Ground I/O Data bus I/O Data bus I/O Data bus I/O Data bus XRESET Master reset Memory write strobe Memory read strobe TMS0 Not used...
  • Page 154 http://www.xiaoyu163.com 3 7 63 1515 0 PE5557B (DVDM ASSY: IC1501) • LCD Control IC Pin Function Pin Name Pin Functions KEY_OUT2 Key matrix output KEY_OUT3 Key matrix output KEY_OUT4 Key matrix output − AVSS Analog ground LCD_VR LCD display density adjustment −...
  • Page 155 http://www.xiaoyu163.com 3 7 63 1515 0 Pin Name Pin Functions POWER_LED POWER key LED lighting signal KEYLOCK_LED Key lock LED lighting signal PLAY_LED Play LED lighting signal JAMMAA JAMMAER input JAMMAB JAMMAER input JAMMAC JAMMAER input JAMMAD JAMMAER input JAMMAE JAMMAER input JAMMAX JAMMAER input...
  • Page 156 http://www.xiaoyu163.com 3 7 63 1515 0 LC78652W (DVDM ASSY: IC201) • Servo DSP IC Pin Function Pin Name Pin Function EFMOUT Status output after binarization of EMF C2 flag output ROMXA CD-ROM data output ROMCK Shift clock output for CD-ROM data output LRSY L/R clock output for CD-ROM data output XHSMOVE...
  • Page 157 http://www.xiaoyu163.com 3 7 63 1515 0 Pin Name Pin Function TEST4 Test input pin Mirror detection signal I/O − JT/XRR Not used DEFIN Defect signal control DEFOUT LDD monitor output FG counter input CTRF Status input after binarization of EMF RESB Reset input Chip select input...

  • Page 158: Lcd Module

    http://www.xiaoyu163.com 7.8.2 LCD MODULE 3 7 63 1515 0 LCD Module (DWG1590) Block Diagram " SEG40 CONTROLLER LSI S6A0070A01-COCX or EQU]V, COM16 LCD PANEL LED+ LED LIGHT-BOX LED- Pin Function Symbol Level Pin Function Ground 5.0V Supply voltage for logic −...

  • Page 159: Disc / Content Format Playback Compatibility

    http://www.xiaoyu163.com 7.9 DISC / CONTENT FORMAT PLAYBACK COMPATIBILITY 3 7 63 1515 0 Disc / Content Format Playback Compatibility General disc compatibility Personal computer-created disc compatibility This player was designed and engineered to be compatible with software bearing one or more of the following logos: •...

  • Page 160: Panel Facilities

    http://www.xiaoyu163.com 8. PANEL FACILITIES 3 7 63 1515 0 Controls and Displays Front panel 14 15 17 18 19 20 21 22 23 5 6 7 8 9 10 11 1 STANDBY/ON button ( VIDEO: When the button is pressed so that the indicator lights, video Press to turn the player ON or set to standby mode.

  • Page 161: Rear Panel

    http://www.xiaoyu163.com 3 7 63 1515 0 Rear panel 1 Power cord connector (AC IN) Important 2 Extend Terminal connector (EXT TERMINAL) • The DVD-V8000 is provided with video and audio input External switches can be connected to control the DVD-V8000. connectors, and supports the use of 1 Vp-p composite The connector can also be used as an RS-232C interface.

  • Page 162: Remote Control Unit

    http://www.xiaoyu163.com 3 7 63 1515 0 Remote control unit 9 REV SCAN button ( Press for fast reverse scanning. Scanning speed will change in 3 levels each time the button is pressed. 10 PLAY button ( ) Press to start playback. 11 PAUSE button ( ) During playback, press to pause playback of video/audio.

  • Page 163: Operation Using A Mouse

    http://www.xiaoyu163.com 3 7 63 1515 0 Operation using a mouse 29 REV STILL/STEP button ( During playback, press to pause playback and display still In addition to the remote control unit, a mouse can also be image; Press and hold for reverse slow-motion playback. Press used to operate the DVD-V8000 if desired.

  • Page 164: Rack Mount Kit (Cb-A802)

    9. RACK MOUNT KIT (CB-A802) 3 7 63 1515 0 9.1 PACKING SECTION L 13942296513 u163 DVD-V8000 http://www.xiaoyu163.com...
  • Page 165 http://www.xiaoyu163.com • PACKING SECTION Parts list 3 7 63 1515 0 Mark No. Description Part No. NSP 1 Rack Mount Bracket (FE) DNH2706 Screw AMZ40P080FTB Instruction Manual (RM) DRE1037 NSP 4 Packing Case (RM) (Paper) DHG2655 NSP 5 Master Carton RM (Paper) DHG2656 Mirror Mat Sheet (300 * 330) DHL1161...

  • Page 166: Installation Procedures

    http://www.xiaoyu163.com 9.2 INSTALLATION PROCEDURES 3 7 63 1515 0 Installation Procedures 3. After confirming that the screws installed in step 1. Disconnect all cords and cables (including power 2 are tightened securely, install the player on the cord) attached to the player. rack.
  • Page 167 http://www.xiaoyu163.com 3 7 63 1515 0 L 13942296513 u163 DVD-V8000 http://www.xiaoyu163.com...

  • Page 168: Jigs List

    http://www.xiaoyu163.com 3 7 63 1515 0 7 Jigs list Name Jig No. Remarks Service Remote Control Unit GGF1381 adjustment, diagnosis DVD Data Disc GGV1174 diagnosis (ID data setting) 24P Flexible Cable GGD1111 Diagnosis of DVDM Assy Extension Board GGF1575 Diagnosis of DVDM Assy DVD Test Disc (DVD-Video) GGV1025 Check of DVD-Video...

This manual is also suitable for:

V8000 - dvd professional player

Table of Contents