Black & Decker Glacier Manual page 3

HOW TO USE YOUR 'GLACIER' ICE-CREAM MAKER
Before first use disassemble the removable parts from the motor unit and wash in warm sudsy
water. Rinse well and dry. D O NOT IMMERSE THE MOTOR UNIT IN WATER O R ANY OTHER UQUID.
Cl e an it with a soft damp cloth and wipe dry.
After removing the lid, blade and icecream container, the upper housing can be separated from
the motor unit by turning it anticlockwise and lifting it off. To re-assemble the upper housing to
the motor unit, position the black spot (located on the side of the housing near the lower edge)
above the on/off light, adjust until it sits in place and then lock it firmly with a clockwise turn.
(FIG. 1. 1
1. Motor Unit
2. Upper Housi n g
3. Icecream container
4. Bl a de
5. Li d
6. Sliding Cap
7. Timer/Control
8. Power light
9. Drive Gear