Installing The Front Bezel; Removing The Front Bezel; Bezel Filter (Optional); Removing The Bezel Filter - Dell PowerEdge R420xr Owner's Manual

Installing The Front Bezel

1. Align the thumb screws on the bezel with the rack ears on the front of the system.
2. Tighten the thumb screws to secure the bezel to the system chassis.
Figure 7. Installing and Removing the Front Bezel
1. front bezel
3. rack ears (2)

Removing The Front Bezel

1. Loosen the thumb screws using a #2 Phillips screwdriver.
2. Unhook the bezel from the rack ears and pull the bezel away from the system.

Bezel Filter (Optional)

Removing the Bezel Filter

1. Remove the screw that secures the filter frame to the bezel.
2. Rotate one end of the filter frame away from the bezel and remove the filter frame.
32
2. thumb screws (2)