Turning On Power; Initial Values - Hitachi w52h User Manual

Turning On Power

Hold down F for at least
1.5 seconds.
The message "Now loading" will appear
on the display for a short while, followed
by the standby screen.
Icon
Signal
Strength
• Communication is not possible while the signal strength
icon is
• Communication may not be possible while the signal
strength icon is
Icon
Battery
Level
• The battery level icon
charging.
Using Extension Mode
※
Using the Extension Mode, W52H automatically shuts down the
radio wave after issuing the Low Battery Alert. This is quite a useful
function that you can still check outgoing/incoming records, content
of e-mail, address book, schedule and so on when necessary. In
this case, you can only use the functions which needs no radio
wave.
■ Turning off power
Hold down F for at least 1.5 seconds.

Initial Values

The following are the initial settings of the phone.
Lock No.
Teens Lock No.
Caller ID
DispRcvingCaller
Profile
14
Strong Medium Weak
(Out of Range).
(Very Weak).
Fully
High Medium
Charged
(Fully Charged) only shows during
1234
1234
ON
ON
Blank
Very Out of
Weak Range
Fully Extension
Low
Discharged Mode
Font Size Add Book Char
Input
Mail Char
EZweb Char
Data Folder Char
Text Memo Char
Standby screen
Charging
※
95
Page
Middle
Middle
Middle
Small
Middle
Middle