NETGEAR WNDR3300f Setup Manual page 14

Wireless Router Setup Manual
The Smart Wizard guides you through installing your router, connecting your router to the
Internet, configuring your wireless network settings, and selecting the optimum security
protection for your network. If you choose not to select a security option during installation,
you can always access the router's user interface later to select a security option (see
Your SSID and Wireless Security Manually" on page 21
Configure Your Wireless Network" on page
To ensure optimum performance of your high-speed wireless router, the
wireless adapter card for each computer in your network should support the
same technology as your router (see the online User Manual for more
information).
You are now connected to the Internet!
After connecting to the Internet, you can:
• Log in to the router and check for new firmware. Refer to the bottom label for the default login
information, or see the steps in
New Firmware" on page
• Set up additional wireless computers in your network for Internet access (see
Your Wireless Settings and Security Options" on page
For advanced features not covered in this manual, see the User Manual on your Resource CD. A
link to the online User Manual also is available from the router interface.
The factory default state is restored when you use the restore factory settings button.
See "Restoring the Default Password and Configuration Settings" on page 40
information about this feature.
10
23).
"Accessing Your Router After Installation and Checking for
19.
Installing Your Wireless Router Using Smart Wizard
or "Using Push 'N' Connect (WPS) to
21).
"Setting
"Configuring
for more