Displaying The Playing Time And Play Information; Before Recording - Sony RDR-GX315 Service Manual

QQ
3 7 63 1515 0
• Progressive and lossless compression JPEG image files
are not supported.
• The image size that the recorder can display is limited
to width 32 - 7680 pixels by height 32 - 8192 pixels.
TE
L 13942296513
Recording

Before Recording

Before you start recording...
• This recorder can record on various discs types.
Select the disc type according to your needs
(page 28).
• Check that the disc has enough available space
for the recording (page 43). For DVD+RWs or
DVD-RWs, you can free up disc space by
erasing titles (page 56).
z Hint
To play a disc recorded with this recorder on other
equipment, finalize the disc (page 67).
Notes
• Timer recordings will start with or without the recorder
turned on. The recorder automatically turns off after a
recording has finished.
• This recorder records at ×1 speed.
Recording mode
Like the SP or EP recording mode of VCRs, this
recorder has eight different recording modes.
Select a recording mode according to the time and
picture quality you need. For example, if picture
quality is your top priority, select the High Quality
mode (HQ). If recording time is your priority,
Super Extended Play mode (SEP) can be a
possible choice. Note that the recording time in the
following table is an approximate guide.
Press REC MODE repeatedly to switch the
recording modes.
I want to record with the
best possible picture
quality, so I'll select HQ.
www
.
http://www.xiaoyu163.com
Displaying the Playing Time
and Play Information
+ RW -RW -RW + R - R DVD
VR
Video
VCD CD DATA CD DATA DVD
You can check disc information, such as playing
time, recording mode, and remaining disc space.
DISPLAY TIME/TEXT
Press DISPLAY.
The information display appears.
Each time you press the button, the display
changes as follows:
Disc information/date and time
m
Disc information only
m
No display
Play
1:23:45
HQ
Rem 16:15
Original
Mon May 02. 2005 10:10 AM
A Playing status
B Playing time
C Recording mode
,
43
Recording mode Recording time
(minute)
HQ (High quality) 60
R
HSP 90
SP (Standard mode) 120
r
LSP 150
r
LP 180
r
EP 240
r
SLP 360
SEP (Long duration) 480
Note
Situations below may cause slight inaccuracies with the
recording time.
– Recording a program with poor reception, or a program
or video source of low picture quality
– Recording on a disc that has already been edited
– Recording only a still picture or just sound
Recording a stereo/SAP program
The recorder can receive and record stereo/SAP
programs.
Stereo programs
When a stereo program is received, the
"STEREO" indicator lights up in the front panel
display. If there is noise in the stereo program,
press AUDIO repeatedly until the "MONO"
indicator disappears from the TV screen. The
sound will be recorded in monaural but with less
noise.
SAP (Second Audio Program)
When a SAP is received, the "SAP" indicator
lights up in the front panel display. To record only
SAP sound, set "Tuner Audio" of "Audio" to
"SAP" in the "Setup" display (page 78).
x ao u163
y
i
45
http://www.xiaoyu163.com
2 9
8
D Remaining disc space (in stop mode)
Remaining time of the current title (during
playback)
E Channel or input source *
F Date and time
* Title type (original or Playlist) for DVD-RWs (VR
mode).
Viewing information on the front
panel display
You can view the information on the front panel
display.
Press TIME/TEXT repeatedly.
The displays differ depending on the disc type or
playing status.
Example: When playing a DVD
Playing time of the current title
RW VR D STEREO SAP
VCDVD
SYNCHRO REC
PROGRESSIVE
Current title number and current chapter
number
VCDVD RW VR D STEREO SAP
SYNCHRO REC
PROGRESSIVE
Clock
D STEREO SAP
VCDVD RW VR
SYNCHRO REC
PROGRESSIVE
Example: When a DVD is stopped
Clock
m
Current title and chapter number
m
Remaining disc space
m
Channel or input source
Example: When playing a CD
Playing time of the current track
m
Current track number
m
Clock
Q Q
3 6 7 1 3
44
Unrecordable pictures
Pictures with copy protection cannot be recorded
on this recorder. Recording stops when a copy
guard signal is detected.
Copy control Recordable discs
signals
Copy-Free
+ RW -RW
VR
+ R - R
Copy-Once
-RW
VR
Ver.1.1 with CPRM*
Ver.1.2 with CPRM*
Copy-Never None
* The recorded disc can be played only on CPRM
compatible equipment (page 29).
.
46
1-10
9 4 2 8
1 5 0 5 8 2 9 9 4
Recording Without the
Timer
+ RW -RW -RW + R - R
VR
Video
Z OPEN/
TV/DVD switch
CLOSE
-RW
Video
CH +/–
INPUT
SELECT
TV/VIDEO
DISPLAY
H PLAY
x STOP
X PAUSE
z REC
REC MODE
1
Press Z OPEN/CLOSE, and place a
recordable disc on the disc tray.
Recording side facing down
2
Press Z OPEN/CLOSE to close the disc
tray.
m
Wait until "LOAD" disappears from the front
panel display.
Unused DVD-RWs are formatted in VR mode
co automatically. To format in Video mode, see
page 81.
3
Press CH +/– or INPUT SELECT repeatedly
to select the channel or input source you
want to record.
9 9
2 8 9 9