Replacing A Turn Signal Light Bulb; Replacing The License Plate Light Bulb - Yamaha 2009 YZF-R1Z Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
Replacing a turn signal light
bulb
1. Remove the turn signal light lens
by removing the screw.
1. Screw
2. Remove the burnt-out bulb by
pushing it in and turning it counter-
7
clockwise.
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screw. NOTICE: Do not over-
tighten the screw, otherwise the
lens may break.
EAU24204
Replacing the license plate
light bulb
1. Remove the license plate light unit
by removing the screws.
1
1. License plate light unit
2. Screw
2. Remove the socket (together with
the bulb) by pulling it out.
[ECA11191]
1. License plate light bulb
EAU24312 3. Remove the burnt-out bulb by pull-
4. Insert a new bulb into the socket.
5. Install the socket (together with the
6. Install the license plate light unit by
1
2
1
7-34
ing it out.
bulb) by pushing it in.
installing the screws.