For Usb Interface Cable Users (For Mac Os X 10.1/10.2.1 Or Greater Users) - Brother mfc8440 Service Manual

CHAPTER 2 INSTALLATION AND BASIC OPERATION
3.2.6 For USB Interface Cable Users (For Mac
(1) Switch off and unplug the machine from the AC outlet and disconnect it from your
Macintosh if you already connected an interface cable.
(2) Turn on your Macintosh
(3) Insert the supplied CD-ROM for the operating system you are using into your CD-ROM
drive.
(4) Double-click the Start Here OS X icon to install the printer driver, Scanner driver, Brother
PC-FAX Send and Remote Setup program. If the language screen appears, select your
language.
(5) Click MFL-Pro Suite to install.
(6) Connect the USB interface cable to your Macintosh
Caution
Do not connect the machine to a USB port on a keyboard or a non powered USB hub.
(7) Turn on the machine by pluging in the power cord. Turn the power switch on.
(8) Select Applications from the Go menu.
(9) Open the Utilities folder.
(10) Open the Printer Center icon.
(11) Click Add Printer....
(12) Select USB.
(13) Select MFC-XXXX, and then click Add.
(14) Select Quit Printer Center from the Printer Center menu.
OK:
The Brother Printer driver, Scanner driver, Brother PC-FAX Send and Remote Setup
Program have been installed and the installation is now complete.
(15) To install Presto! Page Manager, click the Presto! PageManager icon and follow on the
Screen instructions.
NOTE:
You can easily scan, share and organize photos and documents using Presto! PageManager
OK:
Presto! PageManager
®
OS X 10.1/10.2.1 or greater Users)
®
.
®
has been installed and the installation is now complete.
2-24
®
, and then connect it to the machine.
®
.