Table of Contents
Advertisement
technical problems
Technical problems
Problem
The dishwasher does not
start.
The high temperature
indicator is still illuminated
even though the inlet water
is cold.
General problems
Problem
Detergent residue is left in
the slot at the end of the
programme.
Knocking noise in the wash
cabinet.
Smearing appears on
glassware and cutlery.
Kenwood KDW4TTSL_IB_GB_090828.in27 27
Possible Causes
The door is not properly
closed.
The unit is not connected
to the mains.
The unit is not switched on. Press the "on" button and
PCB is faulty.
Possible Causes
The detergent slot was still
damp when detergent was
added.
A spray arms is knock-
ing against an item in the
basket.
The rinse aid dosage is set
too high.
Remedy
Close the door firmly.
Insert the plug to the mains.
select a programme.
•
Disconnect from the
mains.
•
Disconnect the water
inlet.
•
Call a qualified techni-
cian.
Remedy
Make sure the slot is dry
before adding detergent.
Interrupt the programme,
and rearrange the items
which are obstructing the
spray arm. See section
"loading the diswasher".
Adjust the dial of the rinse
aid dispenser to a lower
setting.
GB-7
28/08/09 12:03:07 PM
Advertisement
Table of Contents
