Programme List; Sleep Timer; Sound Output Selection; Teletext - NEC NLT-20 Owner's Manual

Other functions
Calling the programme list
You can check the programmes stored in the memory by
displaying the programme list.
Displaying programme list
1. Press the LIST button to display the Programme
list menu. The programme list appears on the
screen. One programme list contains ten
programmes as right.
Note :
a. You may find some blue programmes. They have been set up to be skipped by
auto programming or in the programme edit mode.
b. Some programmes with the channel number shown in the programme list
indicate there is no station name assigned.
Selecting a programme in the programme list
Select a progranne with the PRxy or VOLÏq button.
Then press the OK button.
The set switches to the chosen programme number.
Paging through a programme list
There are 10 programme table pages in which contain 100 programmes.
Pressing the PRxy or VOLÏq button repeatedly turns the pages.

Sleep timer

You don't have to remember to switch the set off before
you go to sleep. The sleep timer automatically switches
the set to standby after the preset time elapses.
Press the SLEEP button to select the number of minutes.
The display will appear on the screen, followed by 0, 10,
20, 30, 60, 90, 120, 180 and 240. The timer begins to
count down from the number of minutes selected.
Note : a. To view the remaining sleep time, press the
SLEEP button once.
b. To cancel the sleep time, repeatedly press the SLEEP
button until it displays "0".

Sound output selection

In VIDEO mode, you can select output sound for the left
and right loud-speakers.
Repeatedly press the I/II button to select the sound
output.
L+R : Audio signal from audio L input is sent to left loud-
speaker and audio signal from audio R input is sent
to right loud-speaker.
L+L : Audio signal from audio L input is sent to left and
right loud-speakers.
R+R : Audio signal from audio R input is sent to left and
right loud-speakers.
18

Programme list

0 5
1 0 0 0 0 0 6
2 0 0 0 0 0 7
3 8
4 0
POWER
1 2 3
4 5 6
7 8 9
0
* *
PSM SSM I/II
MENU TV/AV
PR
VOL VOL
OK
TV/PC
SLEEP
PR
TEXT/MIX Q.VIEW LIST
UPDATE TIME REVEAL HOLD
NS-201

Teletext

TEXT On/Off

1. Press TEXT/MIX button once, displays the Teletext pages.
2. Press TEXT/MIX button once more, displays the Teletext
pages superimposed on the TV picture.
3. Press the TEXT/MIX button to switch off Teletext.
Text mode is off, and TV mode appears.
If you press TEXT/MIX button repeatedly, displays are changed
as below.
TEXT MIX TV mode

TOP text

The user guide displays four fields-red, green, yellow and blue
at the bottom of the screen. The yellow field denotes the next
group and the blue field indicates the next block.
Group/block/page selection
1. With the BLUE button you can progress from block to block.
2. Use the YELLOW button to proceed to the next group with
automatic overflow to the next block.
3. With the GREEN button you can proceed to the next
existing page with automatic overflow to the next group.
Alternatively the x button can be used.
4. The RED button permits to return to previous selection.
Alternatively the y button can be used

FLOF text

The Teletext pages are colour coded along the bottom of the screen and are
selected by pressing the corresponding coloured button.
Page selection
1. Press the INDEX button to select the index page.
2. You can select the pages, which are colour coded along the bottom line with
the same coloured buttons.
3. The VOLÏq button can be used to select the preceding or following page.
POWER
1 2 3
4 5 6
7 8 9
* 0
*
PSM SSM I/II
MENU TV/AV
PR
VOL VOL
OK
SLEEP TV/PC
PR
TEXT/MIX Q.VIEW LIST
UPDATE TIME REVEAL HOLD
NS-201
19