User Preferences
Set Default Parameter
You can reset the PL3307 to two types of defaults: factory defaults or custom defaults. Scan the appropriate
bar code below to reset the decoder to its default settings and/or set its current settings as custom defaults.
•
Restore Defaults - Scan this bar code to reset all default parameters as follows.
• If you previously set custom defaults by scanning Write to Custom Defaults , scan Restore Defaults
to retrieve and restore the decoder's custom default settings.
• If you did not set custom defaults, scan Restore Defaults to restore the factory default values listed in
Table
A-1.
•
Set Factory Defaults - Scan this bar code to restore the factory default values listed in
deletes any custom defaults set.
•
Write to Custom Defaults - Scan this bar code to set the current decoder settings as custom defaults.
Once set, you can recover custom default settings by scanning Restore Defaults .
*Restore Defaults
Write to Custom Defaults
User Preferences & Miscellaneous Options
Set Factory Defaults
4 - 5
Table A-1.
This