Troubleshooting; Change The Display Information - JVC KD-X330BT Instruction Manual

REFERENCES

Change the display information

Each time you press , the display information changes.
• If the information is unavailable or not recorded, "NO TEXT", "NO NAME", or other
information (eg. station name) appears.
FM or AM Frequency
(For FM Radio Data System stations only)
Station name (PS)
Radio text+
USB (For MP3/WMA/AAC/WAV/FLAC files)
Playing time
Folder/file name
USB-IPOD or ANDROID Playing time
(back to the beginning)
PANDORA Station name
title Playing time
AUX AUX
BT AUDIO Playing time
(back to the beginning)
Day/Clock
Frequency Program type (PTY)
Day/Clock (back to the beginning)
Day/Clock Album title/Artist
(back to the beginning)
Day/Clock Album title/Artist
Shared/Radio Album title Artist
Day/Clock (back to the beginning)
Day/Clock
Day/Clock Album title/Artist

TROUBLESHOOTING

Symptom
Sound cannot be heard.
"MISWIRING CHECK
WIRING THEN PWR ON"
appears.
"PROTECTING SEND
SERVICE" appears.
Source cannot be selected.
Track title
• Radio reception is poor.
• Static noise while
Track title
listening to the radio.
Playback order is not as
Track
intended.
Elapsed playing time is
not correct.
Track title
"NOT SUPPORT" appears
and file skips.
"READING" keeps flashing. • Do not use too many hierarchical levels and folders.
"CANNOT PLAY" flashes
and/or connected device
cannot be detected.
The iPod/iPhone does not
turn on or does not work.
Correct characters are not
displayed.
Remedy
• Adjust the volume to the optimum level.
• Check the cords and connections.
Turn the power off, then check to be sure the terminals of
the speaker wires are insulated properly. Turn the power
on again.
Send the unit to the nearest service center.
Check the [SRC SELECT] setting. ( 4)
Connect the antenna firmly.
The playback order is determined by the file name.
This depends on the recording process earlier.
Check whether the file is a playable format. ( 20)
• Reattach the USB device.
• Check whether the connected device is compatible with this
unit and ensure the files are in supported formats. ( 20)
• Reattach the device.
• Check the connection between this unit and iPod/iPhone.
• Detach and reset the iPod/iPhone using hard reset.
• This unit can only display uppercase letters, numbers, and
a limited number of symbols.
• Depending on the display language you have selected
( 4), some characters may not be displayed correctly.
ENGLISH
21