Station Ring; Trunk Ring - NEC Dterm PSIII User Manual

♦ Select [2] Speaker Ring. PSIII displays:
Speaker Ring
[1]On
[2]Off
♦ Select [2] Off, then press the FNC key or 2 to
disable speaker ring.
Speaker Ring
Off
♦ Setting tone will ring.
♦ After two seconds, return to the standby state.
S R
TATION ING
Allows you to assign ring patterns that tell users
whether an incoming call is from an internal or
external source.
To Change the Station Ring Pattern:
♦ Press the FNC key →3→4→3. PSIII displays:
STN Ring
[1]L1
[2]L2
♦ Select L1 or L2* by using the Scroll
keys. For Mode 2* systems, PSIII displays:
STN Ring
1 2 3 4 5 6 7 8
♦ Press the Scroll
key to select a different Station Ring Pattern.
♦ Press the FNC key to confirm.
♦ Setting tone will ring.
♦ After two seconds, return to the standby state.
NOTE: The default Station Ring pattern is 1.
T R
RUNK ING
Allows you to assign ring patterns that tell users
whether an incoming call is from an internal or
external source.
To Change the Trunk Ring Pattern:
♦ Press the FNC key →3→4→4. PSIII displays:
30
or Scroll
or Scroll keys or the number