Maintenance And Service; Maintenance And Cleaning - Bosch PSR 10,8 LI Original Instructions Manual

OBJ_BUCH-1400-002.book Page 34 Wednesday, July 4, 2012 7:49 AM
34 | English
Working Advice
Apply the power tool to the screw only when it is switched off. Ro-
tating tool inserts can slip off.
After longer periods of working at low speed, allow the machine to cool
down by running it for approx. 3 minutes at maximum speed with no load.
For drilling in metal, use only perfectly sharpened HSS drill bits
(HSS=high-speed steel). The appropriate quality is guaranteed by the
Bosch accessories program.
Before screwing larger, longer screws into hard materials, it is advisable
to predrill a pilot hole with the core diameter of the thread to approx.
of the screw length.

Maintenance and Service

Maintenance and Cleaning

Before any work on the machine (e. g., maintenance, tool change,
etc.) as well as during transport and storage, set the rotational di-
rection switch to the centre position. Unintentional actuation of the
On/Off switch can lead to injuries.
For safe and proper working, always keep the machine and venti-
lation slots clean.
When the battery is no longer operative, please refer to an authorised af-
ter-sales service agent for Bosch power tools.
If the replacement of the supply cord is necessary, this has to be done by
Bosch or an authorized Bosch service agent in order to avoid a safety haz-
ard.
If the machine should fail despite the care taken in manufacturing and
testing procedures, repair should be carried out by an after-sales service
centre for Bosch power tools.
In all correspondence and spare parts order, please always include the
10-digit article number given on the type plate of the machine.
After-sales Service and Customer Assistance
Our after-sales service responds to your questions concerning mainte-
nance and repair of your product as well as spare parts. Exploded views
and information on spare parts can also be found under:
www.bosch-pt.com
2 609 005 103 | (4.7.12)
2
/
3
Bosch Power Tools