Connecting To A Macintosh Computer; Connect The Lcd Monitor To Macintosh - NEC MultiSync LCD4020 User Manual

Connecting to a Macintosh Computer

Connecting your Macintosh computer to your LCD monitor will enable you to display your computer's screen image. Some
video cards or drivers may not display images correctly.

Connect the LCD Monitor to Macintosh

• To connect the VGA IN connector (mini D-sub 15 pin) on the LCD monitor, use the supplied PC - Video RGB signal cable
(mini D-sub 15 pin to mini D-sub 15 pin).
• To connect the RGB/HV IN connector (BNC) on the LCD monitor, use a mini D-sub 15 pin to BNC x 5 signal cable (sold
separately) (BNC INPUT only).
• If you use with a Macintosh PowerBook, set "Mirroring" to Off.
Refer to your Macintosh's owner's manual for more information about your computer's video output requirements and any
special identification or configuring your monitor's image and monitor may require.
• AUDIO IN* 1, 2 and 3 can be used for audio input. To select audio source [IN1], [IN2] or [IN3] press the AUDIO INPUT
button.
LCD monitor
*: The product you purchased may not have this feature.
BNC INPUT only
BNC x 5
To RGB/HV IN
LCD monitor (second monitor)
BNC x 5
BNC x 5
English-16
To audio output
To analog RGB output
Mini D-sub 15 pin
Macintosh