Battery Installation And Replacement - NEC 42/50PD1 User Manual

11 SHARPNESS:
Adjusts the fine screen quality of the video screen.
12 VISUAL NORMAL button:
Returns the screen adjustments to the default factory
visual settings.
13 RASTER NORMAL button:
Returns the screen adjustments to the default factory
raster settings.
14 ID SELECT:
Selects the ID number used when operating one unit at
a time with the remote control when settings of the set
ID have been made to the VIDEO WALL and main
unit.
15 CLEAR:
Deletes the ID number that was set with ID SELECT.
16 Remote control transmitter:
Transmits the remote control signal. (Used with the
wireless remote control.)
17 Remote jack:
Connects the supplied remote control cable when used
as a wired remote control.

Battery Installation and Replacement

The remote control is powered by two 1.5V AAA batteries.
1. Press and open the cover.
2. Align the batteries according to the (+) and (-)
indications inside the case.
3. Replace the cover.
15