NEC SL1100 Programming Manual page 434

SL1100
Item
No.
10 Forced Unscreened
Transfer
11 Auto Time Stamp
Program
47
12 System Administrator 0 = No (Disabled)
13 Dialing Option
14 Next Call Routing
Mailbox
15 Directory List Number 0 = None
16 Voice Prompt Lan-
guage
17 Enable Paging
18 Paging Option
19 Telephone User Inter-
face Type
20 Enable E-mail Notifi-
cation
21 E-mail Address
22 Include Message as
Attachment
23 All Message Notifica-
tion Enabled
2-414
Item Input Data
0 = No (Disabled)
1 = Yes (Enabled)
0 = No (Disabled)
1 = Yes (Enabled)
1 = Yes (Enabled)
0 = No (Disabled)
1 = Yes (Enabled)
Call Routing Mailbox
Number (1 ~ 3 digits, 00
~ 32)
(00 = Undefined)
No entry (Entered by
pressing CLEAR)
1 ~ 8 = List Number
= All
*
Refer to Ta-
ble 2-9 47-02-16 Default
Table on page 2-415.
0 = No (Disabled)
1 = Yes (Enabled)
0 = RNA
1 = Immediately
0 = Numeric
1 = Mnemonic
0 = No
1 = Yes
Up to 48 characters
0 = No
1 = Yes
0 = No
1 = Yes
Description
(Forced UTRF)
Use this option to enable or disable Auto-
mated Attendant Forced Unscreened
Transfer for the Subscriber Mailbox. If ena-
bled, each Screened Transfer (TRF) to the
extension is converted to an Unscreened
Transfer (UTRF). If disabled, Screened
Transfers from the Automated Attendant
occur normally.
Use this option to enable or disable Auto
Time
Stamp for the Subscriber Mailbox. If ena-
bled, after the subscriber listens to a mes-
sage InMail announces the time and date
the message was left. Auto Time Stamp al-
so announces the message sender (if
known).
A subscriber can also enable Auto Time
Stamp from their mailbox.
Use this option to designate the Subscrib-
er Mailbox as a System Administrator. This
allows the subscriber to use the SA op-
tions after logging onto their mailbox.
Dialing Option provides additional dialing
options for Next Call Routing Mailbox calls
(see Next Call Routing Mailbox below). If
enabled, a caller who accesses the Sub-
scriber Mailbox to leave a message can di-
al any of the options in the Next Call Rout-
ing Mailbox Dial Action Table. If disabled,
the caller can dial only 0 (to use the Next
Call Routing Mailbox 0 action).
(Next CR Mbox)
Use this option to assign a Next Call Rout-
ing Mailbox to the Subscriber Mailbox.
This provides callers with additional dialing
options while listening to a Subscriber
Mailbox recorded or default greeting. The
digits the caller can dial depend on the set-
ting of the Next Call Routing Mailbox and
Alternate Next Call Routing Mailbox op-
tions.
ISSUE 6.0
Default
0
0
Mailbox 1 (101)
= 1
Mailbox 2 ~= 0
0
1
0
Station Mailbox
Number
1
0
0
0
0
No Setting
1
1
Program 47 : InMail