Mechanical Assembly; Disassembly Of Mechanism Assembly - Pioneer CT-F950 Service Manual

Mechanical Assembly
When replacing a motor or a belt, be careful of
the sequence of disassembly and reassembly of the
various components concerned.
1. Remove the capstan motor by undoing screws
O t o @ .
2. Remove solenoid A by undoing screws O to ().
Flywheel assembly
Capstan belt
UL cord clamper D
3. Remove the plunger chassis assembly by undoing
scre\ils Oto 9.
4. Remove the sub-c*rassis assembly by undoing
screws I
to (0.
5. Remove the take-up motor by undoing screws
@ and O, and remove solenoid B by undoing
screws (D and O.
Solenoid B
Take-up motor
Supply pulley assembly
Capstan motor
Sub belt
chassis asembly
Solenoid A
Subchæsis assemblY
Fig. 4-5
Disassembly of mechanism asembly