Sony STR-KSL60 Service Manual

SERVICE MANUAL

Ver 1.0 2003. 08
• STR-KSL60 is the receiver section in HT-SL60/SL65.
Manufactured under license from Dolby Laboratories.
"Dolby", "Pro Logic" and the double-D symbol are
trademarks of Dolby Laboratories.
Amplifier section
POWER OUTPUT
Rated Power Output at Stereo Mode
(8 ohms 1 kHz, THD 0.7 %)
25 W + 25 W
Reference Power Output
(8 ohms 1 kHz, THD 10 %)
1)
FRONT : 35 W/ch
1)
CENTER
SURR 1) : 35 W/ch
1)
Depending on the sound field settings and the
source, there may be no sound output.
Frequency response
TV/SAT, DVD, VIDEO: 10 Hz – 50 kHz
+0.5/–3 dB (with sound
field and tone by passed)
Inputs (Analog)
TV/SAT, DVD, VIDEO: Sensitivity: 250 mV
Impedance: 50 kilohms
S/N 3) : 96 dB
(A, 250 mV
3) INPUT SHORT (with sound field and tone by
passed).
4) Weighted network, input level.
Inputs (Digital)
DVD (Coaxial) Sensitivity: –
Impedance: 75 ohms
S/N: 100 dB
(A, 20 kHz LPF)
DVD, TV/SAT (Optical) Sensitivity: –
Impedance: –
S/N: 100 dB
(A, 20 kHz LPF)
Sony Corporation
9-961-218-01
2003H1678-1 Home Audio Company
© 2003.08 Published by Sony Engineering Corporation
SPECIFICATIONS
Outputs
SUB WOOFER
Tone
Gain levels:
Video section
Inputs
: 35 W
Video:
Outputs
Video:
FM tuner section
Tuning range
Antenna terminals
Intermediate frequency
4)
)
Sensitivity
Mono:
Stereo:
Usable sensitivity
S/N
Mono:
Stereo:
Harmonic distortion at 1 kHz
Mono:
Stereo:
Separation
Frequency response
Selectivity
STR-KSL60
AM tuner section
Voltage: 2 V
Tuning range
Impedance: 1 kilohms
With 9-kHz tuning scale: 531 – 1602 kHz
Antenna
±6 dB, 1 dB step
Intermediate frequency
Usable sensitivity
1 Vp-p, 75 ohms
S/N
1 Vp-p, 75 ohms
Harmonic distortion
Selectivity
87.5 – 108.0 MHz
75 ohms, unbalanced
General
Power requirements
10.7 MHz
Power consumption
Power consumption
18.3 dBf, 2.2 µV/75 ohms
(during standby mode) 0.3 W
38.3 dBf, 22.5 µV/75
Dimensions (w/h/d)
ohms
11.2 dBf, 1 µV/75 ohms
Mass (Approx.)
76 dB
70 dB
0.3%
0.5%
45 dB at 1 kHz
30 Hz – 15 kHz
+0.5/–2 dB
60 dB at 400 kHz
HOME THEATER SYSTEM
AEP Model
UK Model
Loop antenna
450 kHz
50 dB/m (at 999 kHz)
54 dB (at 50 mV/m)
0.5% (50 mV/m, 400 Hz)
At 9 kHz: 35 dB
230 V AC, 50/60 Hz
130 W
× ×
430 56 290 mm
including projecting parts
and controls
4.5 kg
— Continued on next page —