Function Mode; Alarm Temperature Setting - Panasonic MDF-C8V1 Series Operating Instructions Manual

FUNCTION MODE

This unit has the following function mode.
Indication
F01 Setting of high temperature alarm
F02 Setting of low temperature alarm
F05 Setting of compressor delay time
F25 Setting of alarm resume time

ALARM TEMPERATURE SETTING

This unit is provided with the high and low temperature alarm and the temperature at which the alarm is
activated is changeable.
The following procedure shows the setting of alarm temperature according to the condition below:
High temperature alarm: activates at the temperature 5
Low temperature alarm: activates at the temperature 5
Note:
The alarm temperature is set at the factory 10
The available range of high/low temperature alarm is between 5
chamber set temperature.
Table 3 Procedure for setting high temperature alarm
Description of operation
1
Press numerical value shift key for
2
5 seconds.
Press numerical value shift key and
3
scroll the figure to 1.
4 Press set key.
Set the temperature to 005 with the
5 digit shift key and numerical value
shift key.
6 Press set key.
Mode
o
C higher and lower than the chamber set temperature.
Key operated
----
SET
SET
15
Settable range
o
Between 5 and 20 C higher than the
chamber set temperature (1
o
Between -5 and -20 C lower than the
chamber set temperature (1
Between 3 and 15 minutes
(1 minute gradient)
0 or between 10 and 60 minutes
(10-minute gradient)
o
C higher than the chamber set temperature
o
C lower than the chamber set temperature
o o
C and 20 C higher/lower than the
Indication after operation
The current chamber temperature is
displayed.
The first digit is flashed.
When pressed, the figure of settable
digit increases.
The first digit is flashed.
Pressing the key shifts the digit which can be set.
When pressed, the figure of settable
digit increases.
Alarm temperature is memorized and
the current chamber temperature is
displayed.
o
C gradient)
o
C gradient)