Breville the Juice Fountain BJE410 Instruction Booklet page 10

ASSEMBLING YOUR BREVILLE PRODUCT
5. Raise the safety locking arm up and
locate into the two grooves on either
side of the juice cover.
The safety locking arm should now be in
a vertical position and locked into place
on top of the juice cover.
6. Slide the food pusher down the food
chute by aligning the groove in the food
pusher, with the small protrusion on the
inside of the top of the feed tube.
FOOD
PUSHER
GROOVE
Continue to slide the food pusher down
on the feed chute.
10
7. Place the pulp container into position
by tilting the motor base slightly to the
right. Insert the pulp container under
the juicer cover on the left hand side
ensuring it is supported by the juicer
cover and motor base.
SMALL
PROTRUSION
INSIDE FEED
TUBE