My Surveillance - Live View - D-Link ShareCenter DNS-320L User Manual

Section 4 - Configuration
FUNCTION
Live Video Screen
Stop/Start
Manual Recording & General
Settings Tab
Enable Digital Zoom
Camera Details Display
Patrol Mode
Pan-Tilt-Zoom Control
Zoom
Mute and Volume Slider
E-map
Snapshot
Auto Scan
View as 1x1
View as 2x2
Actual Size
Full Screen
Camera Name and IP Address
DNS-320L
D-Link ShareCenter™

My Surveillance - Live View

ICON DESCRIPTION
View the live video of cameras connected to the DNS-327L via the network
To stop or start camera live view
Click the "Manual Recording" button to stop or start camera manual recording
Click the "gear cog" to set up the basic configuration
Enable the use of digital zooming on the selected camera.
This screen indicates the currently selected camera's IP address, name, status, and bit rate
Use the patrol buttons to set the camera's patrol mode. You can instruct the camera to undertake a
constant patrol through it's pan/tilt range, specify a preset point for quick reference, or instruct the
camera to go to it's preset point.
Used for cameras that support Pan-Tilt-Zoom (PTZ) controls. You can use these controls to control the
direction of the camera lens.
Click the + or - button to zoom in or zoom out. This option is only available when digital zoom is enabled.
The mute button can be used to mute the sound from the camera and the slider bar used to adjust
the volume.
Use the E-map button to toggle between the live camera view and the E-map display
Take a live snapshot of the live streaming video
Activate auto scan to rotate through the camera live views on the display.
View one screen at a time
View four cameras at a time
The button lets you view cameras with the actual size
View a live video stream of any camera in full screen mode, press escape to return to the user interface.
These icons show the status of each camera and allows you to double-click to toggle the status of
each camera.
User Manual
315