Installing The Speakers On The Tallboy Stand; Connecting The Speakers - Samsung HT-E3500 User Manual

Connections

Installing the Speakers on the Tallboy Stand

* HT-E3530 only - Front Speakers
* HT-E3550 only - Front/Surround Speakers
1. Turn the Stand Base upside-dowon and
connect it to the Stand.
2. Insert screws clockwise into the three holes
marked using a screwdriver as shown in the
illustration.
3. Straighten a supplied speaker wire and put in
the hole on the Center of Stand Base.
4. Connect the upper Speaker to the assembled
Stand.
5. Insert a screw clockwise into the hole on the
rear of the speaker using a screwdriver.
And then connect a speaker cable.
6. This is the appearance after the speaker is
installed.
Follow this steps to install other speaker.

Connecting The Speakers

1. Match the subwoofer cable bundle to the subwoofer by matching the
color coded plug on bundle to the colored sticker on the bottom of the
subwoofer.
2. To attach speaker wire to the subwoofer:
a. Press down the red tab on the back of the subwoofer, insert the red
wire, and then release the tab.
b. Press down the black tab on the back of the subwoofer, insert the
black wire, and then release the tab.
3. Connect the speaker wire plugs from each speaker to the back of the
product by matching the colors of the speaker plugs to the colors of the speaker jacks.
16
|
English
1
Stand Base
Stand
3
5
2
4
Speaker
Stand
6
Black Red