D-Link DVG-2032S User Manual page 37

DVG-2032S/2016S User's Manual
General Settings → Line settings
Hunting/Ring: It is used to set FXS group hunting mode. There are Hunting, Simultaneous Ring and
Sequential Ring.
Hunting: When someone calls in by dialing FXS representative number, the system will alaways assign the
call to the first line according the Ring Priority. You can use up and down arrows to adjust the hunting
priority.
Simultaneous Ring: When someone calls in by dialing FXS representative number, all FXS ports will ring
at the same time.
Sequential Ring: When someone calls in by dialing FXS representative number, the system will assign the
call to each FXS ports in order according Sequential Ring Time. You can adjust Sequential Ring Time for
the ring time of each port.
D-Link Systems, Inc.
VoIP Gateway Configuration
37